BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00277988BTC
Διαθέσιμο
YINGHUA
YINGHUA B75 12GPU Mining Motherboard with G1630 CPU
A B75 mining motherboard supporting twelve GPU connections via USB transfer, bundled with a G1630 processor, two memory slots, four SATA ports, USB 2.0 and 3.0, plus HDMI and VGA video outputs
- CPU TypeIntel Atom
- Supports 12 GPU connections via PCIe 1x slots
- Includes Intel G1630 CPU for immediate operation
- B75 chipset optimises LGA1155 processor performance
- Dual USB 3.0 and USB 2.0 ports for fast data transfer
- Four SATA and one mSATA connectors for storage expansion
Mining board with 12 PCIe lanes
The YINGHUA B75 motherboard is built for GPU mining rigs and ships with a G1630 processor installed. It uses the B75 chipset and an LGA 1155 socket on an all-solid capacitor design. The package includes SATA and switch cables for quick assembly.
Suits builders who need many GPUs on one board
Twelve PCIe 1x slots via USB transfer let you attach a large GPU array without extra riser boards. The single 100 Mbit LAN port and limited rear USB count make it a poor fit for general-purpose servers or workstations needing high-speed networking.
Twelve PCIe 1x slots via USB transfer
This expansion layout is the deciding factor; it determines how many graphics cards can run simultaneously. The board also provides four SATA ports, one MSATA connector, HDMI and VGA outputs, plus two USB 2.0 and two USB 3.0 ports on the rear panel.
Βασικά χαρακτηριστικά
- Supports 12 GPU connections via PCIe 1x slots
- Includes Intel G1630 CPU for immediate operation
- B75 chipset optimises LGA1155 processor performance
- Dual USB 3.0 and USB 2.0 ports for fast data transfer
- Four SATA and one mSATA connectors for storage expansion
Προδιαγραφές
| CPU Type | Intel Atom |
|---|
Ερωτήσεις για αυτό το προϊόν
What power cables must I connect to the 24-pin and 4-pin ATX headers on this B75 board for it to start with the G1630 CPU?
Attach a standard 24-pin ATXPWR cable and a 4-pin ATX12V cable from the power supply; both headers are present on the board and are required for the CPU and chipset to receive power.
Can I keep my existing 100 Mbit network switch when using the onboard LAN port on this motherboard?
Yes, the integrated Realtek 100M network card connects to any 100 Mbit or faster switch using a standard Ethernet cable.
How can I verify the 12 PCIe x1 slots are detected after I plug in the GPU risers?
Enter the BIOS at boot and check that all 12 PCIe x1 links appear as active; the board also provides a speaker header for POST beep codes if a slot is not recognised.
Επίσης σε αυτό το ράφι
Οι πελάτες σύγκριναν και αυτά
Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.
