Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση
48-piece 3D printer nozzle cleaning kit in storage box

YOUYIDUN USYYD-038-028 48-piece nozzle cleaning kit with 7 needle sizes 0.15 to 0.8 mm

SKU CH-23YM-09ZBB

A 48-piece nozzle cleaning kit with 38 stainless-steel needles in seven sizes from 0.15 mm to 0.8 mm, plus tweezers, wire brushes and handled tools for clearing filament clogs

  • TypeUSYYD-038-028
  • Compatible System3DPrinter Nozzle Cleaning Kit
  • Specification3DPrinter Nozzle Cleaning Kit
  • Features3DPrinter Nozzle Cleaning Kit
  • Clears clogged nozzles with seven needle sizes from 0.15 to 0.8 mm
  • Stainless steel needles resist rust and shatter for long service life
  • Needles bend 360 degrees without breaking for thorough cleaning
  • 48-piece kit includes tweezers, wire brushes and handled tools in a storage box
  • Six small handles from 1.5 to 7 mm give secure grip on every needle

48-piece nozzle cleaning kit for 3D printers

This 48-piece kit provides 38 stainless-steel needles in seven diameters from .15 to .8 mm plus tweezers, copper wire brushes and handled drivers. It targets hobbyists and professionals who regularly clear filament blockages from standard nozzle sizes. The compact storage box keeps every tool organised on the bench.

Replaces single needles and improvised wire

A single lost or bent needle often halts a print job, while this set covers the full .15, .25, .35, .4, .5, .6 and .8 mm range in one purchase. The upgrade is worth it when clogs occur across multiple nozzle diameters or when a workshop needs a ready-to-grab kit instead of searching for makeshift tools.

Suits owners of multiple printers

Makers who swap nozzles often or run abrasive filaments will appreciate the breadth of sizes and the 360-degree flexible needles. Users who only print occasionally with a single .4 mm brass nozzle may find a smaller needle pack more economical.

Βασικά χαρακτηριστικά

  • Clears clogged nozzles with seven needle sizes from 0.15 to 0.8 mm
  • Stainless steel needles resist rust and shatter for long service life
  • Needles bend 360 degrees without breaking for thorough cleaning
  • 48-piece kit includes tweezers, wire brushes and handled tools in a storage box
  • Six small handles from 1.5 to 7 mm give secure grip on every needle

Προδιαγραφές

BrandYOUYIDUN
ModelUSYYD-038-028
Part NumberUSYYD-038-028
TypeUSYYD-038-028
Compatible System3DPrinter Nozzle Cleaning Kit
Specification3DPrinter Nozzle Cleaning Kit
Features3DPrinter Nozzle Cleaning Kit

Ερωτήσεις για αυτό το προϊόν

Which nozzle diameters do the 0.15 mm to 0.8 mm needles cover?

The kit provides seven needle diameters — 0.15 mm, 0.25 mm, 0.35 mm, 0.4 mm, 0.5 mm, 0.6 mm and 0.8 mm — matching the most common nozzle sizes on FDM printers.

How should the stainless-steel needles be used without snapping them?

Heat the nozzle, then insert the matching needle and rotate it 360 degrees or bend it gently to any angle; the flexible steel will not break if you avoid forcing it straight in.

When will the copper wire brushes need replacing?

Replace the two copper wire toothbrushes once the bristles become flattened or contaminated, typically after many cold-pull or external cleaning sessions.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.