Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση
Dark gray PLA filament spool in vacuum sealed packaging

Ziro 3D

Ziro 3D PLA PRO 1.75mm 1kg Dark Gray 3D printer filament

SKU CH-0YWH-XREQJ

1.75 mm PLA filament on a 1 kg spool with ±0.03 mm tolerance for consistent, tangle-free printing

  • TypeFilament
  • Precise prints with tight ±0.03 mm tolerance
  • Tangle‑free spool ensures smooth, uninterrupted feeding
  • Vacuum‑sealed pack keeps filament dry until use
  • Low‑shrink PLA prints at 190‑220 °C without heated bed
  • Broad palette of 37 colours for creative freedom

Dark Gray PLA PRO Filament

Ziro 3D PLA PRO filament is a 1.75 mm polylactic acid spool weighing 1 kg and coloured dark gray. It targets hobbyists and makers who want consistent extrusion on common FDM printers such as Creality, Anycubic or Bambu models. The material prints at 190 to 220 °C without a mandatory heated bed and produces no noticeable odour during use. It suits general prototyping, decorative parts and educational projects.

Tangle-Free Spool & Vacuum Seal

Each spool is wound to a 100 % tangle-free standard and sealed in an air-tight vacuum bag measuring 209 by 209 by 73 mm. The packaging keeps the filament dry until opened, reducing the risk of moisture-related print defects. Dimensional tolerance is held to ±0.03 mm, which helps maintain steady line width from layer to layer. Suggested print speeds range from 30 to 90 mm/s with an optional bed temperature of 50 to 60 °C.

Upgrade From Inconsistent Budget Filament

This spool replaces low-cost filament that suffers from diameter variation, tangles or moisture absorption. The tighter ±0.03 mm tolerance and vacuum-sealed delivery cut down on failed prints and rework time. The jump is worth it when you need reliable layer adhesion and colour saturation across long prints. It is not suited for users who require engineering-grade heat resistance or mechanical strength beyond standard PLA capabilities.

Βασικά χαρακτηριστικά

  • Precise prints with tight ±0.03 mm tolerance
  • Tangle‑free spool ensures smooth, uninterrupted feeding
  • Vacuum‑sealed pack keeps filament dry until use
  • Low‑shrink PLA prints at 190‑220 °C without heated bed
  • Broad palette of 37 colours for creative freedom

Προδιαγραφές

TypeFilament

Ερωτήσεις για αυτό το προϊόν

What diameter standard does the 1.75mm filament follow and what tolerance does it hold?

The filament is manufactured to a 1.75mm diameter with a tolerance of ±0.03mm.

What are the spool dimensions and weight so I can check if it fits my printer's holder?

The spool measures 209mm by 209mm by 73mm and has a gross weight of 1.3kg.

What are the recommended nozzle and bed temperatures for the first print, and which step do users often skip?

Set the nozzle between 190°C and 220°C and the bed between 50°C and 60°C; users often forget to level the bed before starting.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.