Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση
Transparent purple PLA filament on a 1kg spool

Ziro 3D

Ziro 3D PLA Pro 3D printer filament 1.75mm Transparent Purple 1kg

SKU CH-ARQG-4RAXP

Biodegradable PLA filament with ±0.03mm tolerance for precise, low-shrinkage prints on most 1.75mm FDM printers

  • ColorTransparent Purple
  • Biodegradable PLA reduces environmental impact
  • Crystal-clear transparency gives luminous, translucent prints
  • ±0.03 mm tolerance ensures precise, consistent extrusion
  • Smooth printing with low shrinkage and minimal stringing
  • Compatible with most 1.75 mm FDM printers

PLA Pro Transparent Purple

Ziro 3D PLA Pro filament is a 1.75mm biodegradable PLA spool coloured Transparent Purple for FDM printers. The material prints at 190-220°C with a heated bed at 50-60°C and delivers a luminous, translucent finish. Dimensional tolerance is held to ±0.03mm across the 1kg spool, which contains roughly 330m of filament. It suits makers who want consistent extrusion and clear aesthetic results.

Check printer compatibility first

Verify that your FDM printer accepts 1.75mm filament and can reach the 190-220°C nozzle range with a bed capable of 50-60°C. The spool dimensions are 209*209*73mm, so confirm the holder or enclosure can accommodate that footprint. A print speed window of 30-90mm/s is suggested, so ensure your slicer profile and motion system can operate reliably within that range. The filament carries RoHS certification for restricted-substance compliance.

Replaces standard PLA for clarity

This spool upgrades from opaque PLA when a project demands light transmission or a crystal-clear look without switching to specialty resins. The ±0.03mm tolerance reduces line-width variation layer to layer, which helps when dimensional precision matters for fitting parts. The jump is worthwhile for decorative models, light-guided pieces, or functional prototypes where transparency and low shrinkage are required. It is not suited for high-temperature or load-bearing applications beyond standard PLA limits.

Βασικά χαρακτηριστικά

  • Biodegradable PLA reduces environmental impact
  • Crystal-clear transparency gives luminous, translucent prints
  • ±0.03 mm tolerance ensures precise, consistent extrusion
  • Smooth printing with low shrinkage and minimal stringing
  • Compatible with most 1.75 mm FDM printers

Προδιαγραφές

ColorTransparent Purple

Ερωτήσεις για αυτό το προϊόν

What comes in the box and do I need anything else to start printing?

The pack contains a single 1 kg spool of 1.75 mm Transparent Purple PLA Pro filament. You only need a compatible FDM printer that accepts 1.75 mm filament; no extra accessories are included.

How do I choose between the available versions of this filament?

This listing is the 1 kg spool in Transparent Purple. The PLA Pro series offers 37 colours in the same 1.75 mm diameter and ±0.03 mm tolerance, so pick the colour you need.

What does the ±0.03 mm tolerance mean for my prints?

It keeps the filament diameter within 0.03 mm of 1.75 mm, giving consistent extrusion, stable line width and reliable layer adhesion across the full 330 m length.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.