Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση
Black 120mm square axial fan with 2-wire power lead

Zyvpee

Zyvpee EEC0251B3-A000-A99 120mm 12V 1.9W 2-wire case fan

SKU CH-WTCB-EYPJT

A 120 mm axial fan with maglev bearing runs at 1600 to 1999 RPM on a 12 V, 1.9 W two-wire connection

  • TypeCase Fan
  • CompatibilityCase
  • Bearing TypeMaglev
  • RPM1600-1999 RPM
  • Power Connector2 wires
  • ColorBlack
  • Maglev bearing reduces friction for quiet operation
  • 12 V, 1.9 W draw keeps power use low
  • 1600–1999 RPM range delivers strong airflow
  • 120 × 120 × 25 mm fits standard case mounts
  • Two-wire connector simplifies installation

Zyvpee 120mm Maglev Case Fan

The Zyvpee EEC0251B3-A000-A99 is a 120mm DC axial fan designed for case cooling. It uses a Maglev bearing and runs on 12V power with a 1.9W draw. The two-wire connector supplies power without speed reporting or PWM control. Builders needing a basic 120mm intake or exhaust fan will find it fits standard mounting points.

Sustained load behaviour

The fan operates between 1600 and 1999 RPM, moving air continuously across its 120 by 25mm frame. Maglev bearings reduce friction compared to sleeve or ball types, helping maintain consistent speed during long sessions. Without PWM the motor runs at full voltage whenever the supply is active. Users who need variable speed tied to temperature should verify their motherboard supports voltage control on two-pin headers.

Installation notes

Four corner holes accept standard 120mm screws for quick mounting in any compatible case. The two-wire lead plugs directly into a 12V header; polarity must be observed because there is no keyed connector. Black blades and frame blend into most builds and the unit includes no LEDs. Buyers who want fan-speed monitoring or software control will need a three or four-pin model instead.

Βασικά χαρακτηριστικά

  • Maglev bearing reduces friction for quiet operation
  • 12 V, 1.9 W draw keeps power use low
  • 1600–1999 RPM range delivers strong airflow
  • 120 × 120 × 25 mm fits standard case mounts
  • Two-wire connector simplifies installation

Προδιαγραφές

BrandZyvpee
SeriesEEC0251B3
ModelEEC0251B3-A000-A99
TypeCase Fan
CompatibilityCase
Bearing TypeMaglev
RPM1600-1999 RPM
Power Connector2 wires
ColorBlack
LEDNon-LED
FeaturesDC axial fan
Dimensions120*120*25mm
Package Contentsrefer to title

Ερωτήσεις για αυτό το προϊόν

How loud and hot does the EEC0251B3-A000-A99 get when it runs continuously at 1600-1999 RPM?

The fan is rated at 1.9 W on a 12 V supply, uses a Maglev bearing and produces no LED light, so it runs quietly and with minimal heat build-up during all-day operation.

What connector must my case or controller provide for the 2-wire power lead on this Zyvpee fan?

The fan terminates in a plain 2-wire DC lead that connects directly to a 12 V header or molex adapter on the motherboard or fan controller.

Will the 120*120*25 mm frame and 2-wire interface fit the mounting points and headers on my older chassis?

Yes — the 120 mm square, 25 mm thick frame matches the standard 120 mm mounting pattern, and the 2-wire lead works with any 12 V header found on legacy boards.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.