Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση

Zyvpee

Zyvpee GM1206PKVX-A 60mm 12V 3.0W 3-pin case fan

SKU CH-7HTV-8A44E

A 60 mm case fan with 12 V, 3.0 W power and 2-ball bearing for reliable DC cooling

  • TypeCase Fan
  • CompatibilityCase
  • Bearing Type2 Ball
  • Power Connector3 Pin
  • ColorBlack
  • LEDNon-LED
  • 60 mm frame fits tight case layouts
  • Dual-ball bearing extends operating life
  • 12 V 3.0 W draw keeps power use low
  • Three-pin connector enables speed monitoring
  • 20 mm thickness suits standard mounting slots

Compact 60 mm case fan

The Zyvpee GM1206PKVX-A is a 60 mm square frame fan designed for tight chassis or projector-style enclosures. It runs on 12 V and draws 3.0 W through a standard three-pin connector. Dual ball bearings support continuous operation in space-constrained builds.

Dual ball bearings and DC drive

The 2 Ball bearing design reduces friction compared with sleeve alternatives, extending service life in always-on scenarios. DC voltage control allows the motherboard or fan controller to regulate speed without PWM signalling. No integrated LEDs keep the unit visually neutral.

Suits small-form-factor and projector cooling

Builders fitting a 60 mm by 20 mm mounting pattern will find this fan a direct match. Systems requiring PWM speed curves, RGB lighting, or larger airflow volumes should consider other form factors.

Βασικά χαρακτηριστικά

  • 60 mm frame fits tight case layouts
  • Dual-ball bearing extends operating life
  • 12 V 3.0 W draw keeps power use low
  • Three-pin connector enables speed monitoring
  • 20 mm thickness suits standard mounting slots

Προδιαγραφές

BrandZyvpee
SeriesGM1206PKVX-A
ModelGM1206PKVX-A
TypeCase Fan
CompatibilityCase
Bearing Type2 Ball
Power Connector3 Pin
ColorBlack
LEDNon-LED
FeaturesDC Cooling
Dimensions60*20mm

Ερωτήσεις για αυτό το προϊόν

Will the 2 ball bearing in the GM1206PKVX-A need relubrication or replacement over time?

The 2 ball bearing is sealed and rated for continuous operation without user maintenance or relubrication.

What thermal or electrical limit appears first when the 12 V 3.0 W fan runs non-stop in a projector chassis?

The 3.0 W power draw at 12 V sets the steady-state thermal ceiling; the motor reaches equilibrium well within its design envelope.

How much noise and heat does the 60 mm frame produce during all-day use at 12 V?

The 3.0 W DC motor stays cool to the touch and the 2 ball bearing keeps acoustic output low enough for quiet projector environments.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.