Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.

Hinnavaatlus Logi sisse

A-Tech

A-Tech 12GB (3x4GB) DDR3 1333 ECC UDIMM 240-Pin Memory Upgrade

SKU CH-B9XV-1RSJX

12 GB DDR3 1333 ECC UDIMM kit (3 × 4 GB) for Mac Pro 2010 and 2012 6‑core and 12‑core models

  • Capacity12GB (3 x 4GB)
  • SpeedDDR3 1333 (PC3 10600)
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor Brand Chipset
  • 12GB kit with three 4GB DDR3 1333 modules
  • ECC unbuffered design protects data integrity on Mac Pro systems
  • 50V operation matches original Apple specifications
  • 240-pin UDIMM form factor fits Mid 2010 and Mid 2012 towers
  • Tested for compatibility with Xeon 2.4GHz, 2.66GHz, 2.93GHz, 3.06GHz and 3.33GHz processors

12GB DDR3 ECC Kit for Mac Pro

This 12GB kit contains three 4GB DDR3 1333MHz ECC UDIMM modules built for Apple Mac Pro systems. It uses unbuffered memory with major-brand chips and runs at 1.50V. The kit matches the specifications required by the MacPro5,1 platform and installs in the 240-pin slots.

Suits Mac Pro 2010 and 2012 towers

Owners of the 2010 or 2012 Mac Pro towers with 6-core or 12-core Xeon processors can use this kit to reach 12GB across three slots. Systems needing registered DIMMs, non-ECC memory, or speeds beyond DDR3 1333 will not be compatible with this module design.

240-pin ECC UDIMM form factor

The modules are 240-pin ECC unbuffered UDIMMs, the only form factor accepted by the listed Mac Pro models. A module with a different pin count, registered buffering, or missing ECC will not fit or will not be recognised by the system firmware.

Põhijooned

  • 12GB kit with three 4GB DDR3 1333 modules
  • ECC unbuffered design protects data integrity on Mac Pro systems
  • 50V operation matches original Apple specifications
  • 240-pin UDIMM form factor fits Mid 2010 and Mid 2012 towers
  • Tested for compatibility with Xeon 2.4GHz, 2.66GHz, 2.93GHz, 3.06GHz and 3.33GHz processors

Tehnilised andmed

BrandA-Tech
SeriesA-Tech DDR3 Apple Mac RAM Memory Upgrades
Capacity12GB (3 x 4GB)
SpeedDDR3 1333 (PC3 10600)
Voltage1.50V
ECCYes
Buffered/RegisteredUnbuffered
ChipsetMajor Brand Chipset
Compatible SystemApple Mac Systems
FeaturesMajor Brand Chips

Küsimused selle toote kohta

Should I choose the 12GB kit or look for a different capacity for my Mac Pro?

This kit provides 12GB across three 4GB modules, matching the triple-channel architecture of the Mac Pro Mid 2010 and Mid 2012 6-Core and 12-Core models for full bandwidth utilisation.

What does the 1333MHz speed deliver in my Mac Pro?

The DDR3 1333 (PC3-10600) modules run at the native memory bus speed of the supported Xeon E5645, X5650, X5670, X5675 and W3680 processors, giving the maximum rated throughput those CPUs officially support.

Will the 240-pin ECC UDIMM interface work in my Mac Pro?

Yes, the 240-pin ECC UDIMM form factor is the exact specification required by MacPro5,1 (A1289 EMC 2314-2 and 2629); the unbuffered ECC design is what the system firmware expects.

Veel samast osakonnast

Kliendid võrdlesid neid ka

Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.