SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
391,99 $
0.00496341BTC
Laos
A-Tech
A-Tech 32GB DDR3L 1333 ECC RDIMM 4Rx4 1.35V Kingston D4G72JL91 KVR13LR9Q4/32 Server RAM
A 32GB DDR3L 1333 ECC registered DIMM with 4Rx4 organisation and 1.35V operation for server and workstation upgrades
- Capacity32GB
- SpeedDDR3L 1333 (PC3L 10600)
- CAS LatencyCL9
- Voltage1.35V
- ECCYes
- Buffered/RegisteredRegistered
- 32 GB capacity handles heavy server workloads
- DDR3L 1333 MHz speed moves data efficiently
- ECC RDIMM design detects and corrects memory errors
- 35 V low voltage reduces power consumption
- 240-pin DIMM form factor fits registered memory slots
Server memory upgrade
This 32 GB DDR3L module runs at 1333 MHz with CL9 latency and operates at 1.35 V. It is built as a registered ECC DIMM using a 4Rx4 organisation for data integrity in server and workstation platforms.
240-pin registered DIMM
The 240-pin form factor fits standard DDR3 server slots while the registered buffer reduces electrical load on the memory controller. ECC circuitry detects and corrects single-bit errors to maintain uptime under sustained workloads.
DDR3L voltage limit
The 1.35 V low-voltage specification saves power compared to standard DDR3 but requires a platform that explicitly supports DDR3L. Systems limited to 1.5 V operation will not run this module reliably.
Põhijooned
- 32 GB capacity handles heavy server workloads
- DDR3L 1333 MHz speed moves data efficiently
- ECC RDIMM design detects and corrects memory errors
- 35 V low voltage reduces power consumption
- 240-pin DIMM form factor fits registered memory slots
Tehnilised andmed
| Brand | A-Tech |
|---|---|
| Capacity | 32GB |
| Speed | DDR3L 1333 (PC3L 10600) |
| CAS Latency | CL9 |
| Voltage | 1.35V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 4Rx4 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
Küsimused selle toote kohta
Does the DDR3L 1333 interface limit bandwidth to PC3L-10600 speeds?
Yes, the module runs at DDR3L 1333 MHz which is rated PC3L-10600, so peak throughput is capped at that transfer rate.
Will this 240-pin DIMM fit a standard server memory slot?
The stick uses the 240-pin DDR3 DIMM form factor, matching the physical slot used by registered DDR3 server boards.
Do I need to populate specific slots for the 4Rx4 registered module to initialise?
Install the RDIMM in the slot sequence recommended by your server manual; registered 4Rx4 modules often require a specific population order to train correctly.
Veel samast osakonnast
Kliendid võrdlesid neid ka
Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.
