Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.

Hinnavaatlus Logi sisse
Green circuit board with black memory chips and gold edge connectors

A-Tech

A-Tech 4GB DDR3 1333 CL9 1.5V 1Rx8 Kingston replacement desktop RAM

SKU CH-CBY8-VRNZV

4GB DDR3 1333MHz CL9 1.5V unbuffered DIMM replaces listed Kingston modules

  • Capacity4GB
  • SpeedDDR3 1333 (PC3 10600)
  • Tested Frequency1333
  • CAS LatencyCL9
  • Voltage1.50V
  • ECCNo
  • Boosts desktop responsiveness with a 4GB DDR3 1333MHz module
  • Runs at standard 1.5V DDR3 voltage for broad compatibility
  • Uses major-brand chips tested for dependable operation
  • Fits 240-pin DIMM slots in AMD and Intel systems
  • Non-ECC unbuffered design matches Kingston HX313C9FB/4 specifications

Direct Kingston Replacement

This A-Tech module is built as a drop-in replacement for eight specific Kingston part numbers including HX313C9FB/4 and KVR13N9S8/4. It delivers 4 GB of DDR3 memory in a single 240-pin DIMM running at 1333 MHz with CL9 latency. The 1.50 V operating voltage matches standard DDR3 specifications exactly.

Ideal For Older Desktop Upgrades

The kit suits users repairing or upgrading legacy AMD and Intel desktops that require non-ECC unbuffered DDR3 memory. Systems needing ECC, registered modules, or speeds beyond PC3-10600 should look at different parts. Always verify your motherboard’s qualified vendor list before ordering.

DDR3 1333 CL9 1.5V Specification

The decisive figure is the tested 1333 MHz speed with CL9 timing at 1.50 V on a 240-pin unbuffered DIMM. If your platform calls for DDR3-1333 PC3-10600 non-ECC memory this module will slot in and run at the rated frequency. Any other DDR generation or voltage will not work.

Põhijooned

  • Boosts desktop responsiveness with a 4GB DDR3 1333MHz module
  • Runs at standard 1.5V DDR3 voltage for broad compatibility
  • Uses major-brand chips tested for dependable operation
  • Fits 240-pin DIMM slots in AMD and Intel systems
  • Non-ECC unbuffered design matches Kingston HX313C9FB/4 specifications

Tehnilised andmed

BrandA-Tech
Capacity4GB
SpeedDDR3 1333 (PC3 10600)
Tested Frequency1333
CAS LatencyCL9
Voltage1.50V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor Brand Chips
FeaturesMajor Brand Chipset
Recommend UseAMD & Intel Compatible

Küsimused selle toote kohta

How much heat or power does this 1.50V DDR3 1333 module add when the system runs all day?

The module operates at the standard DDR3 voltage of 1.50V and a tested frequency of 1333 MHz, so its thermal output matches typical 4GB unbuffered DIMMs at that speed and no extra cooling is required beyond normal case airflow.

What motherboard slot must my desktop already have for this 240-pin DIMM to work?

A desktop motherboard with a DDR3 240-pin DIMM slot is required; the module is non-ECC and unbuffered, so the slot must accept standard UDIMMs.

Will this CL9 DDR3 1333 stick run stably alongside older DDR3 modules that are also rated at 1333 MHz?

Yes, it uses the same 1333 MHz speed and 1.50V voltage as other PC3-10600 modules, so the memory controller will default to those shared timings for stable mixed-channel operation.

Veel samast osakonnast

Kliendid võrdlesid neid ka

Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.