Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.

Hinnavaatlus Logi sisse
Green rectangular circuit board with gold edge connectors and black memory chips

A-Tech

A-Tech 4GB DDR3 1866 ECC RDIMM 2Rx8 CL13 1.5V server RAM

SKU CH-6G9N-W1C5G

4 GB DDR3 1866 ECC registered server memory module with CL13 latency and 1.5 V operation

  • Capacity4GB
  • SpeedDDR3 1866 (PC3 14900)
  • CAS LatencyCL13
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 4GB DDR3 1866 boosts server responsiveness with PC3-14900 speed
  • ECC RDIMM with 2Rx8 rank protects data integrity in critical workloads
  • CL13 latency at 1.5V standard voltage ensures stable registered operation
  • 240-pin DIMM replaces Samsung M393B5270DH0-CMA and M393B5273DH0-CMA modules
  • Major-brand chipset and chips deliver tested reliability for workstation upgrades

A-Tech 4GB DDR3 1866 ECC RDIMM

This A-Tech module is a 4GB DDR3 1866MHz registered DIMM with ECC and a 2Rx8 organisation. It operates at the standard 1.5V and carries a CL13 latency rating. The 240-pin form factor fits server and workstation boards that require registered memory.

Suited for servers needing registered ECC modules

The registered design and ECC function make this module appropriate for platforms that require buffered, error-correcting memory. Systems that accept only unbuffered UDIMMs or that are limited to single-rank configurations will not support this 2Rx8 registered DIMM.

Registered ECC with 2Rx8 organisation

The combination of registered signalling, ECC capability and a dual-rank 2Rx8 layout is the specification that determines whether this module will work in a given server. Verify that the system board explicitly supports registered ECC DDR3 DIMMs with this rank configuration before purchasing.

Põhijooned

  • 4GB DDR3 1866 boosts server responsiveness with PC3-14900 speed
  • ECC RDIMM with 2Rx8 rank protects data integrity in critical workloads
  • CL13 latency at 1.5V standard voltage ensures stable registered operation
  • 240-pin DIMM replaces Samsung M393B5270DH0-CMA and M393B5273DH0-CMA modules
  • Major-brand chipset and chips deliver tested reliability for workstation upgrades

Tehnilised andmed

BrandA-Tech
Capacity4GB
SpeedDDR3 1866 (PC3 14900)
CAS LatencyCL13
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Küsimused selle toote kohta

Does my motherboard need a 240-pin DDR3 slot that supports 1.5 V registered ECC modules?

Yes — this module is a 240-pin DDR3 DIMM that runs at 1.5 V and requires a slot wired for registered ECC operation.

If I add this 1866 MHz stick to slower DDR3 modules, what speed will the system run at?

The memory controller will clock all installed modules down to the lowest common speed, so this 1866 MHz stick will run at the speed of the slowest module present.

How can I confirm the module is detected as 4 GB ECC registered at 1866 MHz with CL13 timings?

Check the BIOS memory summary or run a tool such as CPU-Z; it should show 4 GB, ECC registered, 1866 MHz (PC3-14900) and CAS latency 13.

Veel samast osakonnast

Kliendid võrdlesid neid ka

Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.