BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00275801BTC
Laos
A-Tech
A-Tech 4GB DDR4 2400MHz DIMM 1Rx8 HP 860398-800 934799-001
4GB DDR4 2400MHz desktop DIMM with CL17 latency and 1.2V operation, compatible with HP 860398-800 and 934799-001
- Capacity4GB
- SpeedDDR4 2400 (PC4 19200)
- Tested Frequency2400
- CAS LatencyCL17
- Voltage1.20V
- ECCNo
- 4GB capacity expands multitasking headroom for everyday workloads
- DDR4 2400MHz speed accelerates application loading and data throughput
- CL17 latency and 1.20V operation balance responsiveness with efficiency
- 288-pin DIMM form factor fits standard desktop memory slots
- Tested compatible replacement for HP part numbers 860398-800 and 934799-001
What this module is and who it fits
A-Tech 4GB DDR4 2400MHz DIMM replaces HP part numbers 860398-800 and 934799-001. It is a non-ECC unbuffered desktop module rated at PC4-19200 with CL17 latency and 1.20V operation.
Installation notes and common pitfalls
The module uses a standard 288-pin DDR4 DIMM form factor. Align the notch with the slot key, press firmly until the retention clips click, and verify the system reports 2400MHz in BIOS. Mismatched speeds or mixing ECC and non-ECC modules are the usual causes of boot failure.
Behaviour under sustained load
Rated voltage of 1.20V and CL17 timing deliver stable throughput during extended multitasking sessions. The major-brand chipset and quality-assurance testing help maintain consistent bandwidth without throttling when workloads remain high for long periods.
Põhijooned
- 4GB capacity expands multitasking headroom for everyday workloads
- DDR4 2400MHz speed accelerates application loading and data throughput
- CL17 latency and 1.20V operation balance responsiveness with efficiency
- 288-pin DIMM form factor fits standard desktop memory slots
- Tested compatible replacement for HP part numbers 860398-800 and 934799-001
Tehnilised andmed
| Brand | A-Tech |
|---|---|
| Series | Compatible Replacement for HP |
| Model | 860398-800, 934799-001 |
| Capacity | 4GB |
| Speed | DDR4 2400 (PC4 19200) |
| Tested Frequency | 2400 |
| CAS Latency | CL17 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Features | 860398-800, 934799-001 |
| Recommend Use | Compatible Replacement for HP 860398-800, 934799-001 |
Küsimused selle toote kohta
Will this 4GB DDR4 2400MHz DIMM fit my HP desktop that uses part numbers 860398-800 or 934799-001?
Yes, this module is a compatible replacement for HP part numbers 860398-800 and 934799-001. It matches the DDR4 2400MHz PC4-19200 specification, 288-pin DIMM form factor, 1.20V voltage, CL17 latency, and unbuffered non-ECC design required by those systems.
My motherboard has 288-pin DDR4 slots; will this 1Rx8 single-rank module work alongside existing memory?
This is a standard 288-pin DDR4 2400MHz UDIMM with 1Rx8 organization. It will install in any desktop DDR4 slot supporting 2400MHz operation. For best stability, match speed, voltage (1.20V), and CAS latency (CL17) with your current modules, or populate all slots with identical sticks.
Does this RAM require a heat spreader or active cooling for normal desktop use?
No, this module operates at the standard DDR4 voltage of 1.20V without a heat spreader. At 2400MHz with CL17 timings in typical desktop workloads, passive airflow inside the case is sufficient. Ensure your chassis has basic front-to-rear ventilation for optimal thermal performance.
Veel samast osakonnast
Kliendid võrdlesid neid ka
Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.
