SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
391,99 $
0.00498556BTC
Laos
A-Tech
A-Tech Supermicro Certified 8GB DDR3 1600 CL11 240-Pin Desktop RAM
Supermicro-certified 8 GB DDR3 1600 CL11 240-pin DIMM for compatible systems
- Capacity8GB
- SpeedDDR3 1600 (PC3 12800)
- Tested Frequency1600
- CAS LatencyCL11
- Voltage1.50V
- ECCNo
- Supermicro certified for guaranteed compatibility with supported systems
- 8 GB capacity adds headroom for multitasking and larger workloads
- DDR3 1600 MHz speed with CL11 latency delivers responsive performance
- Standard 1.5 V operation matches DDR3 desktop specifications
- 240-pin unbuffered non-ECC DIMM fits mainstream desktop slots
Supermicro Certified DDR3 1600 DIMM
This 8 GB module is built for Supermicro desktop systems that accept unbuffered non-ECC DDR3 memory. It runs at the standard 1.5 V and carries the vendor qualification MEM-DR380L-HL03-UN16 for direct compatibility.
Hynix chip qualification and factory testing
The module uses Hynix HMT41GU6BFR8C-PB ICs and is validated at 1600 MHz with CL11 latency. Every stick passes A-Tech quality checks before shipment, so it arrives ready to operate at the rated PC3-12800 speed without further adjustment.
Simple 240-pin installation and common pitfalls
Insert the DIMM into an empty DDR3 slot until the retaining clips click; no tools or BIOS changes are required for standard operation. The most frequent issue is mixing this non-ECC stick with registered or ECC modules, which prevents the system from posting.
Põhijooned
- Supermicro certified for guaranteed compatibility with supported systems
- 8 GB capacity adds headroom for multitasking and larger workloads
- DDR3 1600 MHz speed with CL11 latency delivers responsive performance
- Standard 1.5 V operation matches DDR3 desktop specifications
- 240-pin unbuffered non-ECC DIMM fits mainstream desktop slots
Tehnilised andmed
| Brand | SuperMicro |
|---|---|
| Series | Supermicro Certified |
| Model | MEM-DR380L-HL03-UN16 |
| Capacity | 8GB |
| Speed | DDR3 1600 (PC3 12800) |
| Tested Frequency | 1600 |
| CAS Latency | CL11 |
| Voltage | 1.50V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Features | Supermicro Certified MEM-DR380L-HL03-UN16 (HMT41GU6BFR8C-PB) |
| Recommend Use | Compatible Supermicro Systems |
Küsimused selle toote kohta
Will this 240-pin DDR3 DIMM fit my Supermicro motherboard?
This module carries Supermicro certification MEM-DR380L-HL03-UN16, confirming it has been validated for compatible Supermicro systems. Always cross-check your motherboard manual for supported DDR3 1600 non-ECC unbuffered memory.
Can I mix this CL11 1.50V stick with my existing DDR3 1600 modules?
Yes, provided the other modules are also non-ECC unbuffered DDR3 1600 running at 1.50V. The system will operate at the slowest common timing, so matching CL11 avoids down-clocking.
Is any BIOS update or special configuration needed to run at 1600 MHz?
Most Supermicro boards auto-detect DDR3 1600 JEDEC settings. If the module posts at a lower speed, enable the XMP or DOCP profile in BIOS to reach the rated 1600 frequency.
Veel samast osakonnast
Kliendid võrdlesid neid ka
Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.
