Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.

Hinnavaatlus Logi sisse
Rectangular silver ASIC miner with front fan grille and rear exhaust vents

AFRNDK

AFRNDK Antminer S19 86TH/s 3250W Bitcoin Mining Hardware

SKU CH-9NAQ-F2WMW

SHA-256 ASIC miner delivering 86 TH/s at 3250 W with 34.5 J/TH efficiency, 76 dB noise, 220 V input and RJ45 Ethernet

  • TypeMining Barebone System
  • Crypto AlgorithmSHA-256
  • Compatible CurrencyBitcoin (BTC)
  • Mining HardwareASIC
  • Hashrate86TH/S
  • Noise level76dB
  • Delivers 86 TH/s hashrate for high Bitcoin output
  • 5 J/TH power efficiency reduces electricity cost per coin
  • 3250 W wall draw at 25 °C enables predictable energy budgeting
  • 76 dB noise level suits dedicated mining facilities
  • 220 V input requirement protects hardware from voltage damage

AFRNDK Antminer S19 86TH/s SHA-256 Miner

This AFRNDK Antminer S19 is a dedicated SHA-256 ASIC miner built for Bitcoin. It delivers a rated hashrate of 86TH/s while drawing 3250W at the wall. The unit requires a 220V supply and connects via a 10/100M RJ45 Ethernet port. It ships new and is intended for operators running professional mining infrastructure.

Suited for 220V sites

The hardware fits facilities that can provide 220V circuits and handle 76dB of operating noise. It is not suitable for locations limited to lower voltages or for environments where sound levels must stay low. Buyers without access to industrial-grade power distribution or forced-air cooling should consider other options.

Deciding spec: 34.5 J/TH power efficiency

At 34.5 J/TH the miner sets the break-even threshold for electricity cost versus Bitcoin reward. If your power rate makes that efficiency profitable, the S19 86T earns its place; if not, the hardware will not cover its running cost.

Põhijooned

  • Delivers 86 TH/s hashrate for high Bitcoin output
  • 5 J/TH power efficiency reduces electricity cost per coin
  • 3250 W wall draw at 25 °C enables predictable energy budgeting
  • 76 dB noise level suits dedicated mining facilities
  • 220 V input requirement protects hardware from voltage damage

Tehnilised andmed

BrandANTMINER
SeriesS19
ModelS19 86T
TypeMining Barebone System
Crypto AlgorithmSHA-256
Compatible CurrencyBitcoin (BTC)
Mining HardwareASIC
Hashrate86TH/S
Noise level76dB
Power Consumption3250W

Küsimused selle toote kohta

What are the physical dimensions and weight of the Antminer S19 86TH/s unit?

The miner measures 570 mm in length, 316 mm in width and 430 mm in height, with a gross weight of 16.0 kg.

How do I connect the Antminer S19 86TH/s to power and network, and what is the critical voltage requirement?

Connect the unit to a 220 V supply and link it via the RJ45 Ethernet port; applying the wrong input voltage can damage the hardware.

Which components of the Antminer S19 86TH/s typically require replacement over time?

The internal cooling fans are the primary wear items and will need periodic replacement to maintain the rated 76 dB noise level and thermal performance.

Veel samast osakonnast

Kliendid võrdlesid neid ka

Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.