Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.

Hinnavaatlus Logi sisse
Compact rectangular miner with matte metal casing, front vent grille, rear ports and integrated PSU, 179 by 143 by 90 mm, 4.00 kg

AFRNDK

AFRNDK iPollo V1 Mini 300M 280MH/s 270W mining hardware

SKU CH-31CW-KKH72

Compact ETC miner delivering 280 MH/s at 270 W with an included PSU and quiet 40 dB operation

  • Compatible CurrencyETC
  • Hashrate280M
  • Power Consumption270W
  • 280 MH/s (±10 %) hashrate for ETC mining
  • 270 W (±10 %) power draw keeps electricity costs predictable
  • 40 dB noise level suits home or office placement
  • Compact 179×143×90 mm footprint fits tight spaces
  • PSU and power cord included for immediate setup

Compact ETC miner with integrated power supply

The AFRNDK iPollo V1 Mini 300M is a dedicated crypto mining unit built for the EtcHash algorithm. It delivers a rated hashrate of 280(±10%)Mh/s while drawing 270(±10%)W from the wall. A matching power supply and cord are included in the box, so no separate PSU purchase is required. The chassis measures 179×143×90mm and weighs 4.00 Kg, making it small enough for a desktop or shelf deployment.

Practical limits of the EtcHash ASIC interface

The device is fixed to the EtcHash algorithm, meaning it can only mine currencies that share this proof-of-work such as ETC and ETHW. Hashrate and power draw each carry a ±10% tolerance, so actual daily yield and electricity cost will vary within that band. Acoustic output is specified at 40 db, which is comparable to a quiet office environment but still audible in a silent room. No alternative firmware or algorithm switching is documented for this hardware.

Checklist before ordering

Confirm that your electrical circuit can sustain a continuous 270W load with headroom for the ±10% variance. Verify that the included power supply connector matches your local mains socket type and voltage. Ensure the operating location can accommodate the 179×143×90mm footprint and tolerate 40 db of constant fan noise. Finally, validate that your chosen mining pool and wallet support the EtcHash coins you intend to mine.

Põhijooned

  • 280 MH/s (±10 %) hashrate for ETC mining
  • 270 W (±10 %) power draw keeps electricity costs predictable
  • 40 dB noise level suits home or office placement
  • Compact 179×143×90 mm footprint fits tight spaces
  • PSU and power cord included for immediate setup

Tehnilised andmed

BrandIpollo
SeriesV1
ModelV1 MINI 300M
Compatible CurrencyETC
Hashrate280M
Power Consumption270W

Küsimused selle toote kohta

Will the included power supply deliver the 270W the miner needs without a separate purchase?

Yes, the PSU is included in the box so the unit can draw its rated 270W (±10%) immediately.

How much physical space does the 179×143×90mm chassis need on a shelf or rack?

It occupies a footprint of 179 mm by 143 mm and stands 90 mm tall, weighing 4.00 kg.

At 40 dB noise level, is it quiet enough for a home office?

40 dB is comparable to a quiet library; most users find it unobtrusive in a home office.

Veel samast osakonnast

Kliendid võrdlesid neid ka

Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.