Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.

Hinnavaatlus Logi sisse
Silver rectangular 3U rack miner with front vents and rear ports

AFRNDK

AFRNDK Jasminer X16Q 1950Mh/s 8G Wifi 3U mining hardware

SKU CH-TTNE-AHE9J

An ASIC miner delivering 1950 MH/s on Ethash for ETC and ZIL dual mining at 620 W in a quiet 3U chassis

  • TypeMining Machine/Miner
  • Crypto AlgorithmEthash
  • Compatible CurrencyETC
  • Mining HardwareASIC
  • Hashrate1950MH/S
  • Power Consumption620W
  • 1950 MH/s Ethash hashrate for ETC mining
  • 620 W power draw keeps electricity costs low
  • 40 dB noise level suits home or IDC rooms
  • 8 GB memory handles multi-coin workloads
  • 3U 445*132.5*443 mm chassis fits standard racks

AFRNDK Jasminer X16Q 1950Mh/s 8G Wifi 3U Mining

The AFRNDK Jasminer X16Q is an ASIC miner built for the Ethash algorithm. It delivers a hashrate of 1950MH/s with a power draw of 620W. The unit includes 8GB of RAM and supports coins such as ETC, ZIL, ETHW, ETF, ETP and EXP. It is intended for both IDC rooms and home use.

Sustained Load Behaviour

Under continuous operation the miner runs at 620W with a tolerance of ±10%. Its built-in fan keeps noise around 40 dB while maintaining the working temperature range of 0 to 40 degrees. The 3U chassis measures 445 by 132.5 by 443 mm and weighs 10 kg, allowing it to fit in standard racks without extra clearance.

Pre-Order Setup Checks

Verify that your power infrastructure can supply 110 to 240V at the required wattage. Confirm you have an RJ45 Ethernet 10/100/1000M port or a compatible Wi-Fi network for connectivity. Ensure the operating environment stays within the 0 to 40 degree temperature window. Check that your rack or shelf can accommodate the 3U form factor and 10 kg weight.

Põhijooned

  • 1950 MH/s Ethash hashrate for ETC mining
  • 620 W power draw keeps electricity costs low
  • 40 dB noise level suits home or IDC rooms
  • 8 GB memory handles multi-coin workloads
  • 3U 445*132.5*443 mm chassis fits standard racks

Tehnilised andmed

BrandJasminer
SeriesX16Q
ModelX16Q 1950M
TypeMining Machine/Miner
Crypto AlgorithmEthash
Compatible CurrencyETC
Mining HardwareASIC
Hashrate1950MH/S
Power Consumption620W

Küsimused selle toote kohta

What coins can this miner actually mine?

The hardware supports ETC, ZIL, ETHF, ETHW, ETF, ETP and EXP through dual-mining combinations such as ETC+ZIL or ETHW+ZIL, and single-coin modes for each listed currency.

Will it fit in a standard 19-inch rack and what power lead do I need?

The 3U chassis measures 445 mm wide, 132.5 mm high and 443 mm deep, fitting a standard rack, and the unit accepts 110-240 V AC so a local IEC C13 cable is all that is required.

How loud is it in a home office and what network ports are available?

Noise is rated at 40 dB ±10 %, and connectivity includes a Gigabit RJ45 Ethernet port plus built-in Wi-Fi for wireless operation.

Veel samast osakonnast

Kliendid võrdlesid neid ka

Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.