Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.

Hinnavaatlus Logi sisse
Clear flexible PVC tubing 16 mm OD 10 mm ID one metre

Alphacool

Alphacool AlphaTube HF 16/10mm Ultra Clear 1m PVC

SKU CH-A6H4-KJ8F6

Clear PVC tubing with 10 mm inner diameter and 16 mm outer diameter, rated for -10 °C to 80 °C and 3 bar working pressure, supplied in a 1 metre length

  • TypeTubing

Color Clear

  • Crystal-clear tubing shows coolant flow
  • 16 mm OD and 10 mm ID fit standard fittings
  • 65-70 A-Shore hardness prevents kinking in tight bends
  • Rated for -10 °C to 80 °C operating range
  • 18 bar burst pressure handles high-pressure loops

AlphaTube HF 16/10mm tubing

AlphaTube HF is a clear PVC tube built for custom water-cooling loops. It connects pumps, radiators, blocks and reservoirs in a single, continuous run. The one-metre length suits compact or test builds. Enthusiasts who prefer rigid acrylic or PETG tubing will not use this flexible hose.

Critical spec: 10 mm ID and 16 mm OD

The inner diameter of 10 mm and outer diameter of 16 mm define every fitting choice. Compression or barb fittings must match these exact dimensions, otherwise the loop will leak. The data sheet also lists an alternative 13 mm OD variant, so verify the 16 mm OD before ordering.

Capacity and limits: 1 metre, 80 °C, 3 bar

One metre covers a simple CPU-to-radiator route with modest bends; longer or complex loops need additional lengths. The hose withstands continuous coolant temperatures up to 80 °C and a working pressure of 3 bar, with a burst rating of 18 bar. Beyond those thermal or pressure limits the material can deform or rupture.

Põhijooned

  • Crystal-clear tubing shows coolant flow
  • 16 mm OD and 10 mm ID fit standard fittings
  • 65-70 A-Shore hardness prevents kinking in tight bends
  • Rated for -10 °C to 80 °C operating range
  • 18 bar burst pressure handles high-pressure loops

Tehnilised andmed

TypeTubing

Selle mudeli teised versioonid

4 veel samast sarjast

Sama seeria, erinev mälumaht, jahutus või taktsagedus — võrrelge enne otsustamist.

Küsimused selle toote kohta

How does the 16 mm outer diameter work with standard 3/8" ID compression fittings in a loop?

The tubing has a 10 mm inner diameter and 16 mm outer diameter, matching common 3/8" ID compression fittings for a secure seal in custom water-cooling loops.

What pressure and temperature limits does the PVC tubing handle during operation?

Rated for a working pressure of 3 bar and burst pressure of 18 bar, with an operating range of -10 °C to 80 °C.

What clearance is needed for the 1 m length and 16 mm OD when routing inside a case?

The 1 m length of 16 mm OD PVC tubing has a 65–70 Shore A hardness, giving enough rigidity to resist kinking while remaining flexible for tight routing.

Veel samast osakonnast

Kliendid võrdlesid neid ka

Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.