Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.

Hinnavaatlus Logi sisse

Alphacool

Alphacool NexXxos XT45 V.2 140mm Radiator 1015515

SKU CH-TJ8D-PZMWT

A 140 mm solid-copper radiator with 12 FPI and five G1/4 ports for custom-loop cooling

  • TypeRadiator
  • ColorBlack
  • FeaturesIt’s the best system because it’s your system! Only be satis
  • Full copper construction maximises heat transfer
  • 12 fins per inch balance airflow and cooling density
  • Five G1/4 ports allow flexible loop routing
  • 140 mm fan compatibility suits compact builds
  • 5 mm thickness fits standard mounting points

Alphacool NexXxos XT45 V.2 140mm Radiator

The Alphacool NexXxos XT45 V.2 is a 140mm liquid-cooling radiator built for custom-loop enthusiasts who want maximum thermal capacity in a single-fan footprint. Its solid-copper construction targets builders chasing the highest heat-dissipation potential from a compact 140mm form factor.

Five G1/4 ports and countersunk screw plugs

Five G1/4 threaded ports give flexible inlet, outlet and bleed-point placement so the radiator can be mounted in any orientation. Countersunk screw plugs sit flush with the end chambers, preventing tube interference and keeping cable routing clean in tight builds.

12 FPI fin density on a 45.5mm core

A 12 fins-per-inch density across the 45.5mm-thick copper core balances airflow resistance with surface area, allowing a single 140mm fan to move sufficient air at moderate speeds. The all-copper water channels and fins transfer heat efficiently without demanding extreme fan RPM, keeping loop noise low under typical loads.

Põhijooned

  • Full copper construction maximises heat transfer
  • 12 fins per inch balance airflow and cooling density
  • Five G1/4 ports allow flexible loop routing
  • 140 mm fan compatibility suits compact builds
  • 5 mm thickness fits standard mounting points

Tehnilised andmed

BrandAlphacool
Model1015515
TypeRadiator
ColorBlack
FeaturesIt’s the best system because it’s your system! Only be satisfied with perfection! The new Alphacool NexXxos V.2 radiators will take you to the next level! Increase the performance of your system with the new Alphacool NexXxos V.2 radiators.

Küsimused selle toote kohta

What thread standard do the five G1/4 ports use and what does it limit in practice?

All five ports use G1/4 BSPP threads, so every fitting, plug or adapter must match that thread; the standard caps the outer diameter of any connected tubing or block to the G1/4 bore size.

What are the exact external dimensions I need to clear for this 140 mm radiator?

The radiator measures 177 mm wide, 143 mm deep and 45.5 mm thick, so your case must provide at least that footprint plus clearance for the chosen fan.

How is the radiator mounted and which step is most often missed?

Use the countersunk screw plugs to secure the unit through the end chambers; the step people miss is installing the extra G1/4 bleed port on the opposite end chamber before locking the radiator in place.

Veel samast osakonnast

Kliendid võrdlesid neid ka

Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.