ASRock
ASRock PRO-650G 650 W power supply
ATX 3.1 compatible 650 W unit with 80 PLUS Gold efficiency, a 120 mm fan and full protection suite
- ColorBlack
- TypeATX 3.1 Compatible
- Maximum Power650 W
- Fans1 x 120 mm
- Max PSU Length140 mm
- Energy-Efficient80 PLUS GOLD Certified
- 80 PLUS Gold certification saves energy at up to 650 W output
- ATX 3.1 compatibility fits modern motherboards without adapters
- 120 mm fan runs quietly while cooling the 140 mm depth chassis
- Full protection suite OCP SCP OVP UVP OTP OPP guards every rail
- MTBF rated above 100000 hours for long-term reliability
ATX 3.1 compatible 650 W unit
The ASRock PRO-650G is an ATX 3.1 compatible power supply rated at 650 W. It carries 80 PLUS Gold certification for high efficiency. A single 120 mm fan provides cooling in a compact 140 mm depth chassis. It fits standard ATX cases and supports modern platform requirements.
Value builds needing one GPU
This unit suits builders assembling a mid-range system with a single graphics card. It provides one 6+2 pin PCIe connector and one EPS 4+4 pin CPU connector. Builds requiring two or more PCIe power cables should look at a different model. The 650 W limit also rules out high-end multi-GPU configurations.
One 6+2 pin PCIe connector
The power supply includes exactly one 6+2 pin PCIe connector for graphics card power. Verify that your chosen GPU requires only a single such connector before purchasing. The unit also supplies four SATA connectors and two 4-pin peripheral connectors for drives and accessories.
Põhijooned
- 80 PLUS Gold certification saves energy at up to 650 W output
- ATX 3.1 compatibility fits modern motherboards without adapters
- 120 mm fan runs quietly while cooling the 140 mm depth chassis
- Full protection suite OCP SCP OVP UVP OTP OPP guards every rail
- MTBF rated above 100000 hours for long-term reliability
Tehnilised andmed
| Brand | ASRock |
|---|---|
| Series | PRO Series |
| Model | PRO-650G |
| Color | Black |
| Type | ATX 3.1 Compatible |
| Maximum Power | 650 W |
| Fans | 1 x 120 mm |
| Max PSU Length | 140 mm |
| Energy-Efficient | 80 PLUS GOLD Certified |
| Protection | OCP, SCP, OVP, UVP, OTP, OPP |
| MTBF | >100,000 Hours |
| Cable Spec | Motherboard cable (24pin): 1 EPS 12V CPU connectors (4+4pin): 1 PCIe connectors (6+2pin): 1 4-pin Peripheral connectors: 2 SATA 5-pin connectors: 4 |
| Dimensions | 140 x 150 x 86mm |
| Tarnekaal | 1.81 kg |
| Pakendi mõõtmed | 267 × 203 × 102 mm |
Selle mudeli teised versioonid
2 veel samast sarjast
Sama seeria, erinev mälumaht, jahutus või taktsagedus — võrrelge enne otsustamist.
Küsimused selle toote kohta
Will the 140 mm length fit my ATX case?
The unit measures 140 mm deep, 150 mm wide and 86 mm high, matching standard ATX dimensions.
How do I connect the 24-pin motherboard cable without bending pins?
Route the single 24-pin cable through the case grommet first, then press it straight onto the board header until the latch clicks.
When should I plan to replace the 120 mm fan?
The fan is rated for over 100000 hours MTBF, so replacement is unlikely during normal use.
Veel samast osakonnast
Kliendid võrdlesid neid ka
Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.
NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
NEMIX RAM DDR5 ECC RDIMM 1.5TB 12x128GB 6400MHz CL52 1.1V 2Rx4 288-Pin Supermicro H14SST-GE
- 1.5TB (12 x 128GB)
- 288-Pin DDR5 RDIMM
NEMIX RAM DDR5 6400 ECC Registered RDIMM 1.5TB 12x128GB 2Rx4 CL52 1.1V Supermicro H14DSH memory upgrade
- 1.5TB (12 x 128GB)
- 288-Pin DDR5 RDIMM
NEMIX RAM DDR5 ECC RDIMM 2TB 16x128GB 6400MHz CL52 1.1V 2Rx4 Supermicro H14DSH
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM





