Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.

Hinnavaatlus Logi sisse
Rectangular 2.5 inch SATA SSD, black label, 7mm thick

BIWIN STORAGE TECHNOLOGY LIMITED

BIWIN STORAGE TECHNOLOGY LIMITED 64GB MLC 2.5" SATA internal SSD

SKU CH-ZTJG-VDV5W

A 64 GB MLC internal SSD with SATA 6 Gb/s interface delivering 511 MB/s sequential read and 172 MB/s sequential write for low-power storage upgrades

  • Device TypeInternal Solid State Drive (SSD)
  • Form Factor2.5"
  • Capacity64GB
  • Memory ComponentsMLC
  • InterfaceSATA III
  • Max Sequential Read511 MB/s

Options 64GB

  • MLC memory delivers 511 MB/s sequential read speed
  • 172 MB/s sequential write accelerates file saves
  • 2,000,000 hour MTBF supports long-term reliability
  • 3 W idle power reduces system energy draw
  • 7 mm slim 2.5" form factor fits standard drive bays

64 GB MLC SATA SSD for legacy upgrades

This BIWIN 2.5 inch internal SSD delivers 64 GB of MLC flash storage through a SATA III 6 Gb/s interface. Sequential reads reach 511 MB/s and writes reach 172 MB/s. The 7 mm height fits standard laptop bays and desktop brackets. MTBF is rated at 2000000 hours for long-term reliability.

Suits older laptops and embedded systems needing

The drive works in any system with a 2.5 inch SATA slot and a 5 V supply. Low idle power of 0.30 W helps battery life in portable gear. Active draw is 3.42 W under load. Operating range of 0 to 70 °C covers typical indoor environments. Buyers who need more than 64 GB or faster throughput should look at larger or newer drives.

MLC flash and 511 MB/s read decide fit

MLC memory provides higher endurance than entry-level TLC alternatives. The 511 MB/s sequential read figure is the key performance indicator for boot and application loading. Write speed of 172 MB/s limits large-file copy performance. Match the 7 mm thickness and SATA connector to your device before purchase.

Põhijooned

  • MLC memory delivers 511 MB/s sequential read speed
  • 172 MB/s sequential write accelerates file saves
  • 2,000,000 hour MTBF supports long-term reliability
  • 3 W idle power reduces system energy draw
  • 7 mm slim 2.5" form factor fits standard drive bays

Tehnilised andmed

BrandBIWIN
Device TypeInternal Solid State Drive (SSD)
Form Factor2.5"
Capacity64GB
Memory ComponentsMLC
InterfaceSATA III
Max Sequential Read511 MB/s
Max Sequential Write172MB/s
MTBF2,000,000 hours
Power Consumption (Idle)0.30W
Power Consumption (Active)3.42W
Operating Temperature0 to 70 °C
Storage Temperature-40 to 85 °C
Operating Humidity5 to 95%
Height98.7mm
Width69.55
Depth7mm
Weight80g

Selle mudeli teised versioonid

3 veel samast sarjast

Sama seeria, erinev mälumaht, jahutus või taktsagedus — võrrelge enne otsustamist.

Küsimused selle toote kohta

Will this 64 GB drive fit a standard 2.5-inch laptop bay?

Yes, it measures 98.7 mm by 69.55 mm by 7 mm, matching the common 2.5-inch 7 mm form factor used in most laptops and desktops.

Does the operating system see the full 64 GB capacity?

The drive provides 64 GB of raw NAND; the OS will report a slightly lower usable figure because it calculates capacity in binary gigabytes.

Is a separate power adapter required for this SSD?

No, it draws power directly from the SATA 5 V supply, consuming 0.30 W idle and 3.42 W active.

Veel samast osakonnast

Kliendid võrdlesid neid ka

Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.