SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
391,99 $
0.0049743BTC
Laos
Computer Memory Solutions
Computer Memory Solutions 16GB (2x8GB) DDR3 1333MHz PC3-10600 CL9 1.5V Non-ECC DIMM for Dell OptiPlex 790
16 GB DDR3 kit with two 8 GB modules at 1333 MHz CL9 for Dell OptiPlex 790
- Capacity16GB (2 x 8GB)
- Type240-Pin DDR3 SDRAM
- SpeedDDR3 1333 (PC3 10600)
- CAS LatencyCL9
- Timing9-9-9
- Voltage1.5V
- 16 GB dual-channel kit boosts multitasking headroom
- Dell OptiPlex 790 validated compatibility ensures trouble-free install
- 1333 MHz DDR3 speed matches system spec exactly
- CL9 1.5 V unbuffered DIMMs run at stock voltage
- Two 8 GB modules fill two of four slots
Dell OptiPlex 790 16GB DDR3 Kit
This 16GB kit contains two 8GB DDR3 1333MHz DIMMs built to the PC3-10600 standard. The modules run at 1.5V with CL9 timings and use unbuffered non-ECC chips. They are validated for the Dell OptiPlex 790 desktop platform.
Suited for OptiPlex 790 owners filling two slots
The kit adds 16GB across two 240-pin sockets and works within the system's 32GB maximum capacity. Buyers needing more than 32GB total memory or requiring ECC error correction should look elsewhere. The modules are not registered or buffered.
Steady operation at rated JEDEC settings
Each DIMM operates at the standard 1333MHz frequency and 1.5V without overclocking headroom. The 2Rx8 organisation and major-brand chipset deliver stable throughput during extended workloads. No heat spreader is fitted, so airflow in the chassis manages module temperature.
Põhijooned
- 16 GB dual-channel kit boosts multitasking headroom
- Dell OptiPlex 790 validated compatibility ensures trouble-free install
- 1333 MHz DDR3 speed matches system spec exactly
- CL9 1.5 V unbuffered DIMMs run at stock voltage
- Two 8 GB modules fill two of four slots
Tehnilised andmed
| Brand | Computer Memory Solutions |
|---|---|
| Model | CM10246410600DIMM |
| Capacity | 16GB (2 x 8GB) |
| Type | 240-Pin DDR3 SDRAM |
| Speed | DDR3 1333 (PC3 10600) |
| CAS Latency | CL9 |
| Timing | 9-9-9 |
| Voltage | 1.5V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Compatible System | Dell Optiplex 790 |
| Package Content | 2 Memory RAM Sticks |
Küsimused selle toote kohta
Does my Dell OptiPlex 790 need a specific BIOS version or chipset to use these 1333 MHz DDR3 modules?
The kit is validated for the OptiPlex 790; install the two 8 GB sticks and the system will detect them at 1333 MHz without additional configuration.
Can I keep my existing 4 GB DDR3 sticks and add this 16 GB kit to reach the 32 GB maximum?
Yes, the OptiPlex 790 has four 240-pin slots and supports up to 32 GB, so you can combine the new 2x8 GB modules with your current memory.
How do I confirm the memory is running at the rated 1333 MHz and CL9 timings after installation?
Boot the PC, open Task Manager or CPU-Z, and verify the speed reads 1333 MHz with 9-9-9 latency timings.
Veel samast osakonnast
Kliendid võrdlesid neid ka
Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.
