Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.

Hinnavaatlus Logi sisse
Two green circuit boards with black memory chips, no heat spreaders, 288-pin DDR4 DIMM form factor

Computer Memory Solutions

Computer Memory Solutions 16GB (2x8GB) DDR4 2666 CL19 DIMM memory upgrade

SKU CH-TPGC-6P90H

16 GB dual-channel DDR4 kit at 2666 MHz CL19, validated for Dell OptiPlex 7070 SFF and Tower systems

  • Capacity16GB (2 x 8GB)
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 2666 (PC4 21300)
  • CAS LatencyCL19
  • Timing19-19-19
  • Voltage1.20V
  • 16 GB dual-channel kit for smoother multitasking
  • 2666 MHz DDR4 speed matching Dell OptiPlex 7070 specs
  • CL19 latency at 1.20 V for stable operation
  • 288-pin unbuffered DIMMs install in standard slots
  • Lifetime warranty from Computer Memory Solutions

Dell OptiPlex 7070 DDR4 upgrade

This 16 GB kit uses two 8 GB DDR4 DIMMs rated at 2666 MHz with CL19 timing. It is built specifically for Dell OptiPlex 7070 Small Form Factor and Tower systems. The unbuffered, non-ECC modules run at 1.2 V and fit standard 288-pin slots.

Sustained load behaviour

Matched pairs let the memory controller run in dual-channel mode without down-clocking to the slowest installed stick. The 19-19-19 timing and 1.2 V operation keep latency steady during long workloads. No heat spreader is fitted, so case airflow must handle the thermal load.

Installation notes

Insert both sticks into the matching-coloured slots to activate dual-channel mode; the board has four sockets and supports up to 64 GB total. Mixing with existing modules forces all memory to run at the lowest common speed. A 64-bit operating system is required to address the full capacity.

Põhijooned

  • 16 GB dual-channel kit for smoother multitasking
  • 2666 MHz DDR4 speed matching Dell OptiPlex 7070 specs
  • CL19 latency at 1.20 V for stable operation
  • 288-pin unbuffered DIMMs install in standard slots
  • Lifetime warranty from Computer Memory Solutions

Tehnilised andmed

BrandComputer Memory Solutions
ModelCM1024642666DIMM
Capacity16GB (2 x 8GB)
Type288-Pin DDR4 SDRAM
SpeedDDR4 2666 (PC4 21300)
CAS LatencyCL19
Timing19-19-19
Voltage1.20V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemDell OptiPlex OptiPlex 7070 Small Form Factor (SFF), OptiPlex 7070 Tower
Package Content2 Memory RAM Sticks

Küsimused selle toote kohta

How much heat does the 1.20 V DDR4 2666 kit add when the OptiPlex 7070 runs all day?

At the standard 1.20 V DDR4 voltage the modules draw minimal power and have no heat spreader, so they add very little heat inside the OptiPlex 7070 chassis.

What must already be in the Dell OptiPlex 7070 for these 288-pin DIMMs to work?

The system needs a 64-bit operating system and at least one free 288-pin DDR4 slot; the OptiPlex 7070 SFF and Tower both provide four such slots.

Will the CL19 timing slow down older DDR4 sticks I keep in the other slots?

All installed memory runs at the slowest module speed, so any older DDR4 DIMMs will operate at this kit's 2666 MHz CL19 timing.

Veel samast osakonnast

Kliendid võrdlesid neid ka

Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.