SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
391,99 $
0.00502384BTC
Laos
Computer Memory Solutions
Computer Memory Solutions 8GB (2x4GB) DDR4 2400 CL17 System Specific Memory
8GB dual-channel DDR4 kit at 2400 MHz CL17, validated for ASUS Prime X470-PRO and Z390 boards
- Capacity8GB (2 x 4GB)
- Type288-Pin DDR4 SDRAM
- SpeedDDR4 2400 (PC4 19200)
- CAS LatencyCL17
- Timing17-17-17
- Voltage1.2V
- 8 GB dual-channel kit boosts multitasking with two 4 GB modules
- DDR4 2400 MHz speed moves data at PC4-19200 bandwidth
- CL17 17-17-17 timing keeps latency low for responsive performance
- 2 V unbuffered non-ECC design matches mainstream desktop power profiles
- Validated for ASUS Prime X470-PRO, Z390-A, Z390-P and WS Z390 PRO
Capacity & Kit
This Computer Memory Solutions kit provides 8 GB of DDR4 memory in a matched pair of 4 GB modules. It runs at 2400 MHz with CL17 timings at 1.2 V and uses standard 288-pin unbuffered DIMMs. The kit is validated for the listed ASUS and ASmobile Prime motherboards.
Ideal buyers & limits
Builders upgrading or repairing the Prime X470-PRO, Prime Z390-A, Prime Z390-P or WS Z390 PRO will find guaranteed compatibility. Buyers who need ECC error correction, registered modules, higher capacities per stick or faster speeds should look at a different specification.
Pre-install checks
Confirm your motherboard model matches one of the four Prime boards named in the compatibility list. Verify that two DDR4 DIMM slots are free and that the board accepts unbuffered, non-ECC memory at 1.2 V. Ensure the BIOS is updated if the board has been stored for a long period.
Põhijooned
- 8 GB dual-channel kit boosts multitasking with two 4 GB modules
- DDR4 2400 MHz speed moves data at PC4-19200 bandwidth
- CL17 17-17-17 timing keeps latency low for responsive performance
- 2 V unbuffered non-ECC design matches mainstream desktop power profiles
- Validated for ASUS Prime X470-PRO, Z390-A, Z390-P and WS Z390 PRO
Tehnilised andmed
| Brand | Computer Memory Solutions |
|---|---|
| Model | CM512642400DIMM |
| Capacity | 8GB (2 x 4GB) |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL17 |
| Timing | 17-17-17 |
| Voltage | 1.2V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Compatible System | ASUS/ASmobile Prime X470-PRO, Prime Z390-A, Prime Z390-P, WS Z390 PRO |
| Package Content | 2 Memory RAM Sticks |
Küsimused selle toote kohta
Which motherboard must I already have so this 288-pin DDR4 kit installs and runs at CL17?
The kit is validated for ASUS/ASmobile Prime X470-PRO, Prime Z390-A, Prime Z390-P and WS Z390 PRO boards with four DIMM slots supporting up to 64 GB total.
Can I keep my existing DDR4 modules and add this 2 x 4 GB kit without changing voltage?
Yes, the modules run at the standard 1.2 V used by all consumer DDR4, so they share the same voltage rail as any other DDR4 sticks already installed.
How do I confirm the kit is operating at the rated 2400 MHz and CL17 timing after installation?
Open the BIOS or a tool such as CPU-Z and verify the memory frequency reads 2400 MHz with timings 17-17-17 at 1.2 V.
Veel samast osakonnast
Kliendid võrdlesid neid ka
Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.
