SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
391,99 $
0.00501895BTC
Laos
Computer Memory Solutions
Computer Memory Solutions CM10246410600SODRH 16GB (2x8GB) DDR3 1333MHz SO-DIMM memory upgrade
16 GB dual-channel DDR3 kit for the mid-2011 21.5-inch iMac Core i5 2.5
- Capacity16GB (2 x 8GB)
- Type204-Pin DDR3 SO-DIMM
- SpeedDDR3 1333 (PC3 10600)
- CAS LatencyCL9
- Timing9-9-9
- Voltage1.5V
- 16 GB total capacity delivered as a matched pair of 8 GB modules
- DDR3 1333 MHz speed rated at PC3-10600 for responsive system performance
- 204-pin SO-DIMM form factor fits the iMac 21.5-inch Mid-2011 memory slots
- CL9 9-9-9 timing at 1.5 V provides stable unbuffered non-ECC operation
- Guaranteed compatible with Apple iMac Core i5 2.5 21.5-inch Mid-2011 A1311
Product identity
This kit delivers 16 GB of DDR3 1333 MHz memory in two 8 GB SO-DIMM modules. It is built for the Apple iMac Core i5 2.5 21.5-Inch Mid-2011 and uses 204-pin unbuffered non-ECC chips at 1.5 V with CL9 timing.
Who it suits
Owners of the specified iMac model who need the maximum 16 GB upgrade from a trusted brand will find guaranteed compatibility. Buyers who want more storage, a different memory generation, ECC support or modules for any other system should look elsewhere.
Installation notes
The SO-DIMM slots are accessible behind the memory door on the bottom edge of the iMac; no tools are required beyond a Phillips screwdriver for the door. The usual issue is failing to seat both modules fully until the latches click, which leaves the system seeing only half the expected capacity.
Põhijooned
- 16 GB total capacity delivered as a matched pair of 8 GB modules
- DDR3 1333 MHz speed rated at PC3-10600 for responsive system performance
- 204-pin SO-DIMM form factor fits the iMac 21.5-inch Mid-2011 memory slots
- CL9 9-9-9 timing at 1.5 V provides stable unbuffered non-ECC operation
- Guaranteed compatible with Apple iMac Core i5 2.5 21.5-inch Mid-2011 A1311
Tehnilised andmed
| Brand | Computer Memory Solutions |
|---|---|
| Model | CM10246410600SODRH |
| Capacity | 16GB (2 x 8GB) |
| Type | 204-Pin DDR3 SO-DIMM |
| Speed | DDR3 1333 (PC3 10600) |
| CAS Latency | CL9 |
| Timing | 9-9-9 |
| Voltage | 1.5V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Compatible System | Apple Imac "Core I5" 2.5 21.5-Inch (Mid-2011) |
| Package Content | 2 Memory RAM Sticks |
Küsimused selle toote kohta
Do I need a 2011 iMac with four SO-DIMM slots to use both 8GB modules from this 16GB kit?
The kit is validated for the Mid-2011 21.5-inch iMac which has four slots and a 32GB maximum, so both 8GB modules will be recognised when all slots are populated.
Will these CL9 1333MHz modules run at the correct speed if I leave older CL11 1333MHz sticks in the other two slots?
The memory controller will operate all installed modules at the lowest common speed and latency, so the CL9 sticks will drop to CL11 timing to match the older pair.
How can I confirm the full 16GB is active after installing the two 8GB sticks?
Open About This Mac or System Report; it should show 16GB total memory with two 8GB DDR3 1333MHz modules listed in the memory slot detail.
Veel samast osakonnast
Kliendid võrdlesid neid ka
Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.
