SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
391,99 $
0.00501651BTC
Laos
Computer Memory Solutions
Computer Memory Solutions CM6GB5300SO 6GB DDR2 667 SODIMM 200-pin 2-piece kit iMac 20 2.0Ghz Ma876Ll/A
6GB DDR2 667 MHz 200-pin SODIMM kit upgrades compatible 20-inch iMac to 6GB
- Capacity6GB
- Type200-Pin DDR2 SO-DIMM
- SpeedDDR2 667 (PC2 5300)
- CAS LatencyCL5
- Timing5-5-5
- Voltage1.8V
- 6 GB total capacity for iMac 20" 2.0 GHz MA876LL/A
- DDR2-667 (PC2-5300) speed matches factory specification
- 200-pin SODIMM form factor fits the two available slots
- 2-piece kit (1 × 4 GB + 1 × 2 GB) fills both sockets
- 8 V unbuffered non-ECC modules with CL5 timing
Apple iMac 20" 2.0GHz Kit
This 6 GB DDR2 SODIMM kit is built for the Apple iMac 20-inch 2.0 GHz Intel Core 2 Duo (MA876LL/A). It contains two unbuffered non-ECC modules, a 4 GB stick and a 2 GB stick, totalling the system maximum of 6 GB. Both pieces run at 667 MHz (PC2-5300) with CL5 5-5-5 timings at 1.8 V.
Upgraders hitting the 6 GB ceiling
The kit suits owners of that specific iMac who want to reach the factory memory limit in one purchase. It is not for machines that take a different pin count, a different voltage, or a different DDR generation. Buyers whose iMac already holds two 4 GB modules, or whose model accepts more than 6 GB total, should look elsewhere.
200-pin DDR2 SO-DIMM interface
The modules use the 200-pin DDR2 SO-DIMM form factor, keyed for PC2-5300 667 MHz operation. That single specification decides whether the kit fits; if the target system requires a different pin layout or a different memory generation, the memory will not install.
Põhijooned
- 6 GB total capacity for iMac 20" 2.0 GHz MA876LL/A
- DDR2-667 (PC2-5300) speed matches factory specification
- 200-pin SODIMM form factor fits the two available slots
- 2-piece kit (1 × 4 GB + 1 × 2 GB) fills both sockets
- 8 V unbuffered non-ECC modules with CL5 timing
Tehnilised andmed
| Brand | Computer Memory Solutions |
|---|---|
| Model | CM6GB5300SO |
| Capacity | 6GB |
| Type | 200-Pin DDR2 SO-DIMM |
| Speed | DDR2 667 (PC2 5300) |
| CAS Latency | CL5 |
| Timing | 5-5-5 |
| Voltage | 1.8V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Compatible System | Apple Imac 20" 2.0Ghz Intel Core 2 Duo Ma876Ll/A |
| Package Content | 2 Memory RAM Sticks |
Küsimused selle toote kohta
Will the 200-pin DDR2 667 SODIMMs run alongside any original 2 GB stick I keep in the second slot of my iMac 20 2.0 GHz?
The kit supplies a 4 GB and a 2 GB module, filling both SODIMM sockets for the supported 6 GB maximum; keeping an old stick would exceed the two-slot limit.
How can I confirm the 1.8 V CL5 memory is recognised at 667 MHz after installation?
Open System Profiler on macOS and verify the reported speed shows 667 MHz and the total capacity reads 6 GB across both slots.
Does the box contain only the two SODIMM sticks or are tools or adapters included?
The package content lists two memory RAM sticks — one 4 GB and one 2 GB — with no tools, adapters or extra cables supplied.
Veel samast osakonnast
Kliendid võrdlesid neid ka
Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.
