Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.

Hinnavaatlus Logi sisse
Black low-profile CPU cooler with 120mm ARGB fan and aluminum heatsink

Cooler Master

Cooler Master RR-I7C7-18PA-R1 CPU cooler 120mm ARGB 70mm 95W

SKU CH-WKW3-9BW72 MPN RR-I7C7-18PA-R1

Low-profile 120 mm ARGB air cooler with copper-core aluminium heatsink fits Intel LGA 1700 and 1851 sockets, 70 mm height, 95 W TDP

  • ColorBlack
  • TypeFan & Heatsinks
  • Fan Size120mm
  • CPU Socket CompatibilityIntel LGA 1700 / Intel LGA 1851
  • Bearing TypeRifle
  • RPM650-1800 RPM +/- 10%
  • Low-profile 70 mm height fits compact Intel LGA 1700 / 1851 builds
  • 120 mm PWM fan delivers 37.08 CFM airflow at 28 dBA max noise
  • Copper-core base with aluminium fins handles 95 W TDP efficiently
  • Addressable RGB lighting syncs with major motherboard RGB ecosystems
  • Rifle bearing fan runs 650-1800 RPM for balanced cooling performance

Low-profile Intel cooler for 95W CPUs

The Cooler Master i70C ARGB is a 70mm-tall air cooler built for Intel LGA 1700 and LGA 1851 sockets. It targets small-form-factor builders who need to cool a 95W TDP processor without exceeding tight case clearances. A 120mm PWM fan with rifle bearing spins between 650 and 1800 RPM to move up to 37.08 CFM. The unit weighs 406g and includes the LGA 1700 install kit.

95W thermal limit and 28 dBA noise ceiling

The aluminium heatsink with copper insert is rated for 95W TDP, so processors beyond that envelope will throttle or overheat. Fan speed tops out at 1800 RPM with a maximum noise level of 28 dBA, limiting acoustic headroom in silent builds. Addressable RGB lighting uses a 3-pin 5V header and is certified to sync with Asus AURA, Gigabyte RGB Fusion, MSI Mystic Light and ASRock RGB LED. The 4-pin PWM connector provides standard speed control.

Check 70mm clearance and 5V ARGB header

Verify that your chassis allows at least 70mm of cooler height from the motherboard surface to the side panel. Confirm the board has a 5V 3-pin ARGB header if you want lighting control; otherwise the LEDs will remain at default behaviour. Ensure the CPU socket is LGA 1700 or LGA 1851, as the supplied mounting hardware does not support other platforms. The 120mm fan occupies 120.00 x 120.00 x 25.00 mm, so check for RAM or VRM heatsink interference.

Põhijooned

  • Low-profile 70 mm height fits compact Intel LGA 1700 / 1851 builds
  • 120 mm PWM fan delivers 37.08 CFM airflow at 28 dBA max noise
  • Copper-core base with aluminium fins handles 95 W TDP efficiently
  • Addressable RGB lighting syncs with major motherboard RGB ecosystems
  • Rifle bearing fan runs 650-1800 RPM for balanced cooling performance

Tehnilised andmed

BrandCOOLER MASTER
SeriesI70C
ModelRR-I7C7-18PA-R1
ColorBlack
TypeFan & Heatsinks
Fan Size120mm
CPU Socket CompatibilityIntel LGA 1700 / Intel LGA 1851
Bearing TypeRifle
RPM650-1800 RPM +/- 10%
Air Flow37.08 CFM (Max)
Noise Level28 dBA (Max)
Power Connector4 Pin
LEDAddressable RGB
Heatsink MaterialAluminum
Fan Mounting Types to HeatsinkHorizontal
Max CPU Cooler Height70 mm
Fan Dimensions120.00 x 120.00 x 25.00 mm
Weight406g
Package ContentsI70C LGA1700
Quick Start Guide
LGA1700 Install Kit
Tarnekaal0.48 kg
Pakendi mõõtmed132 × 124 × 91 mm

Küsimused selle toote kohta

Should I pick the 70 mm height version or a taller cooler for my case?

This cooler is 70 mm tall, so it fits cases that limit CPU cooler height to 70 mm; if your case allows more clearance you could consider a taller model, but this is the only height offered for the i70C.

What does the 95 W TDP rating mean when the cooler is installed?

The 95 W TDP rating indicates the maximum heat load the aluminum fins and copper insert are designed to dissipate under typical workloads.

Does the 4‑pin PWM connector limit fan speed control on my motherboard?

The 4‑pin PWM connector lets the motherboard vary the fan between 650 and 1800 RPM, so speed control is handled by the board’s PWM header, not capped by the cooler itself.

Veel samast osakonnast

Kliendid võrdlesid neid ka

Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.