Corn Electronics
Corn Electronics TiPlus5000 1TB internal SSD
1TB NVME SSD delivering 3500 MB/s sequential read and 3100 MB/s sequential write for desktop, laptop and PS5
- Device TypeInternal Solid State Drive (SSD)
- Capacity1TB
- Memory ComponentsTLC
- Fast boot and load times with 3500 MB/s sequential read
- Smooth large-file transfers at 3100 MB/s sequential write
- Responsive multitasking from 465,000 IOPS random read
- Sustained write performance backed by 390,000 IOPS random write
- Long-term reliability with 600 TBW endurance rating
Corn Electronics TiPlus5000 1TB
The Corn Electronics TiPlus5000 is a 1TB internal SSD built for desktops, laptops and PS5 consoles. It uses an M.2 2280 form factor with a PCIe 3.0 x4 NVME interface and TLC NAND. The drive targets users who need fast primary storage for operating systems, games and large media libraries.
Sustained write behaviour
Sequential write speed for the 1TB model is 3100 MB/s, with 4K random write performance of 390,000 IOPS. Endurance is rated at 600 TBW. Under continuous heavy writes the controller manages thermal throttling to protect NAND longevity, so peak throughput may reduce after extended full-span writes.
Thermals noise and power
The drive has no moving parts, so it produces no audible noise during operation. Power draw scales with PCIe 3.0 activity and the controller’s thermal management. In typical mixed workloads the SSD runs within standard M.2 slot power limits without requiring additional heatsinks or active cooling.
Põhijooned
- Fast boot and load times with 3500 MB/s sequential read
- Smooth large-file transfers at 3100 MB/s sequential write
- Responsive multitasking from 465,000 IOPS random read
- Sustained write performance backed by 390,000 IOPS random write
- Long-term reliability with 600 TBW endurance rating
Tehnilised andmed
| Device Type | Internal Solid State Drive (SSD) |
|---|---|
| Capacity | 1TB |
| Memory Components | TLC |
Küsimused selle toote kohta
How much power does the TiPlus5000 1TB draw during sustained reads and writes?
The 1 TB model is rated for 3500 MB/s sequential read and 3100 MB/s sequential write, with 465 000 IOPS random read and 390 000 IOPS random write, indicating typical NVMe power levels for a PCIe 3.0 drive.
What slot and key type must my motherboard or laptop provide for this M.2 2280 drive?
The drive uses an M.2 2280 form factor and requires an M-key slot that supports PCIe 3.0 x4 NVMe signalling.
Will the TiPlus5000 1TB work in a PCIe 2.0 slot or an older M.2 socket limited to two lanes?
The SSD is designed for PCIe 3.0 x4; it will fall back to PCIe 2.0 x4 or x2 if the slot allows, but sequential speeds will drop below the rated 3500 MB/s read and 3100 MB/s write.
Veel samast osakonnast
Kliendid võrdlesid neid ka
Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.
