Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.

Hinnavaatlus Logi sisse
Three rectangular LED modules with USB cable and small remote control

CreatryLab 3 Pack RGB LED Lamp Kit 16T 16 Colors Remote Memory USB 5V 1.5m Cable 7.8x5.5x1.6in

SKU CH-5GDA-K3DQM

Three RGB LED lamp modules with 16 colours, 24-key IR remote, memory recall and 1.5 m USB 5 V cables fit standard 3D-printed light boxes

  • ColorRGB 16 Colors
  • Compatible SystemWindows 7
  • Specification7.8 L x 5.5 W x 1.6 H inches, RGB 16 Colors, 16T
  • FeaturesPersonal Computer
  • Smart memory retains last colour and brightness settings
  • 24-key IR remote selects 16 static colours and 4 dynamic modes
  • Tailored for Bambu Lab X1/P1/A1 and MakerWorld light-box projects
  • Plug-and-play USB 5V power with 1.5m cable fits printer ports or power banks
  • Compact 7.8 x 5.5 x 1.6 in modules install without soldering

Tailored Lighting for 3D Prints

This three-pack RGB LED lamp kit is designed for 3D printed light boxes, lithophanes and MakerWorld hardware projects. It suits hobbyists who want integrated illumination without soldering or complex wiring. The kit replaces generic strips with a compact, modular form factor built for standard printed enclosures. Power comes from a 5V USB source such as a printer port, power bank or PC.

Plug-and-Play Integration

Each unit connects via a 1.5m USB cable for flexible placement inside tight DIY structures. The 5V interface draws power directly from the printer or any compatible USB port, so no external adapter is required. A 24-key IR remote controls 16 static colours and four dynamic modes, while a smart memory function retains the last colour and brightness setting after power cycles. The kit fits printers including Bambu Lab X1, P1 and A1 series.

Ideal for Enclosure Builders

Makers who need a solder-free, memory-enabled light source for printed enclosures will find this kit straightforward. Builders who require more than three lamps, a different control protocol or a non-USB power input should look at other solutions. The fixed 16-colour palette and IR remote may not suit users wanting app-based or addressable LED control. Dimensions are 7.8 x 5.5 x 1.6 inches per unit.

Põhijooned

  • Smart memory retains last colour and brightness settings
  • 24-key IR remote selects 16 static colours and 4 dynamic modes
  • Tailored for Bambu Lab X1/P1/A1 and MakerWorld light-box projects
  • Plug-and-play USB 5V power with 1.5m cable fits printer ports or power banks
  • Compact 7.8 x 5.5 x 1.6 in modules install without soldering

Tehnilised andmed

BrandCreatryLab
Part Number16T
ColorRGB 16 Colors
Compatible SystemWindows 7
Specification7.8 L x 5.5 W x 1.6 H inches, RGB 16 Colors, 16T
FeaturesPersonal Computer

Küsimused selle toote kohta

What happens to the memory function if the USB power is interrupted during a long print?

The intelligent memory retains the last colour and brightness setting so the lamp restores your chosen mode when power returns.

How much heat does the kit add inside a closed 3D-printed enclosure after hours of use?

The 5 V USB-powered LEDs run cool, adding only a subtle ambient warmth even during extended operation.

Which USB port on my printer or PC must be free for the 1.5 m cable to reach?

Any standard 5 V USB-A port on a Bambu Lab X1, P1 or A1 series printer, a power bank or a PC will power the kit.

Veel samast osakonnast

Kliendid võrdlesid neid ka

Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.