Crucial
Crucial P3 Plus 4TB NVMe PCIe 4.0 M.2 2280 internal SSD
A 4 TB PCIe 4.0 NVMe M.2 2280 drive delivering 4800 MB/s reads and 4100 MB/s writes for fast system storage
- Device TypeInternal Solid State Drive (SSD)
- Form FactorM.2 2280
- Capacity4TB
- InterfacePCI-Express 4.0 x4
- Max Sequential ReadUp to 4800 MBps
- Max Sequential WriteUp to 4100 MBps
- 4TB capacity stores large project libraries and game collections
- PCIe 4.0 x4 interface delivers up to 4800 MB/s sequential read speed
- Up to 4100 MB/s sequential write accelerates file transfers and content creation
- 650,000 IOPS random read improves responsiveness in multitasking workloads
- 1,500,000 hours MTBF supports long-term reliability for intensive use
Capacity and Interface
The Crucial P3 Plus is a 4TB internal solid-state drive built in the M.2 2280 form factor. It connects through a PCI-Express 4.0 x4 interface using the NVMe protocol. Sequential reads reach up to 4800 MBps and writes up to 4100 MBps.
Suitability
This drive suits professionals, enthusiasts and gamers who want a large NVMe volume for fast system responsiveness and game loading. Systems limited to PCIe 3.0 will not achieve the quoted 4800 MBps read and 4100 MBps write figures.
Deciding Specification
The PCI-Express 4.0 x4 NVMe interface is the single specification that decides compatibility. Verify your motherboard provides an M.2 slot wired for PCIe 4.0 x4 to obtain the rated 4800 MBps read and 4100 MBps write performance.
Põhijooned
- 4TB capacity stores large project libraries and game collections
- PCIe 4.0 x4 interface delivers up to 4800 MB/s sequential read speed
- Up to 4100 MB/s sequential write accelerates file transfers and content creation
- 650,000 IOPS random read improves responsiveness in multitasking workloads
- 1,500,000 hours MTBF supports long-term reliability for intensive use
Tehnilised andmed
| Brand | Crucial |
|---|---|
| Series | P3 |
| Part Number | CT4000P3PSSD8 |
| Device Type | Internal Solid State Drive (SSD) |
| Form Factor | M.2 2280 |
| Capacity | 4TB |
| Interface | PCI-Express 4.0 x4 |
| Max Sequential Read | Up to 4800 MBps |
| Max Sequential Write | Up to 4100 MBps |
| 4KB Random Read | Up to 650,000 IOPS |
| 4KB Random Write | Up to 900,000 IOPS |
| MTBF | 1,500,000 hours |
Küsimused selle toote kohta
Does my motherboard need an M.2 2280 slot with PCIe 4.0 x4 support to install the CT4000P3PSSD8?
Yes, the drive uses the M.2 2280 form factor and connects via a PCIe 4.0 x4 NVMe interface, so the slot must provide that electrical link.
Will the P3 Plus 4TB work in a PCIe 3.0 M.2 slot if I keep my current board?
It will operate at PCIe 3.0 speeds, limiting sequential reads to the slot's lower bandwidth instead of the drive's 4800 MBps maximum.
How can I verify the SSD is delivering its rated 4800 MBps read and 4100 MBps write performance after installation?
Run a sequential benchmark such as CrystalDiskMark using a 1 GiB test file on the NVMe drive and compare the results to the 4800/4100 MBps figures.
Veel samast osakonnast
Kliendid võrdlesid neid ka
Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.
