Crucial
Crucial P3 Plus CT4000P3PSSD8 4TB M.2 2280 PCIe 4.0 NVMe internal SSD
High-capacity 4 TB NVMe drive delivering sequential reads up to 4800 MB/s and writes up to 4100 MB/s over PCIe 4.0 x4
- Device TypeInternal Solid State Drive (SSD)
- Used ForConsumer
- Form FactorM.2 2280
- Capacity4TB
- Memory Components3D NAND
- InterfacePCI-Express 4.0 x4 NVMe
Options 4TB P3 Plus
- 4TB P3
- 4TB P3 Plus
- 2TB P3
- 2TB P3 Plus
- 1TB P3
- 1TB P3 Plus
- 500GB P3
- 500GB P3 Plus
- Up to 4800 MB/s read speed with PCIe 4.0 x4 NVMe
- Up to 4100 MB/s write speed for faster file transfers
- 4000 GB capacity stores large games and media libraries
- 3D NAND technology improves density and endurance
- Backward compatible with PCIe Gen3 systems
4TB NVMe storage for consumer workloads
This Crucial P3 Plus drive delivers four terabytes of capacity in the M.2 2280 form factor. It uses Micron 3D NAND and a PCI-Express 4.0 x4 NVMe interface for internal storage upgrades. The drive targets consumer desktops and laptops that need high-capacity solid-state performance.
Backward compatibility with Gen3 systems
The PCIe 4.0 interface operates at full speed on supporting platforms and falls back to Gen3 on older motherboards. This allows the same drive to serve new builds and upgrade older machines without a separate purchase. No bundled software or accessories are included with the bare drive.
PCIe 4.0 x4 lane limit and sequential throughput
The x4 link caps maximum sequential transfer at the interface ceiling of PCIe 4.0. Rated speeds reach up to 4800 MBps read and 4100 MBps write, so sustained workloads cannot exceed that bandwidth. Real-world throughput also depends on host controller implementation and thermal conditions.
Põhijooned
- Up to 4800 MB/s read speed with PCIe 4.0 x4 NVMe
- Up to 4100 MB/s write speed for faster file transfers
- 4000 GB capacity stores large games and media libraries
- 3D NAND technology improves density and endurance
- Backward compatible with PCIe Gen3 systems
Tehnilised andmed
| Brand | Crucial |
|---|---|
| Series | P3 Plus |
| Model | CT4000P3PSSD8 |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | M.2 2280 |
| Capacity | 4TB |
| Memory Components | 3D NAND |
| Interface | PCI-Express 4.0 x4 NVMe |
| Protocol | NVMe |
| Max Sequential Read | Up to 4800 MBps |
| Max Sequential Write | Up to 4100 MBps |
| Tarnekaal | 0.05 kg |
| Pakendi mõõtmed | 137 × 95 × 13 mm |
Selle mudeli teised versioonid
5 veel samast sarjast
Sama seeria, erinev mälumaht, jahutus või taktsagedus — võrrelge enne otsustamist.
Crucial
Crucial P3 Plus CT1000P3PSSD8 1TB internal SSD
- Internal Solid Stat…
- Consumer
75,99 $
0.00097601BTC
Laos
Küsimused selle toote kohta
Will this M.2 2280 drive fit in a laptop slot that only supports PCIe 3.0?
Yes, the drive is backward compatible with PCIe 3.0 slots, though sequential speeds will be limited to the Gen3 maximum.
Does the 4TB capacity require a heatsink for sustained writes?
The drive uses Micron 3D NAND and operates within standard M.2 thermal limits; a motherboard heatsink is recommended for heavy workloads but not mandatory.
What real-world benefit does the 4800 MBps read speed give over a Gen3 drive?
The manufacturer states up to 43 percent faster performance than the fastest Gen3 NVMe SSDs, cutting load times for large games and video projects.
Veel samast osakonnast
Kliendid võrdlesid neid ka
Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.
