DELL
DELL 342-2098 1TB 7200 RPM SAS 3.5" internal hard drive with tray
1 TB 7200 RPM SAS 3.5-inch internal hard drive with tray for server storage
- PackagingBare Drive
- InterfaceSerial Attached SCSI (SAS)
- Capacity1TB
- RPM7200 RPM
- UsageIdeal for Servers
- Form Factor3.5"
- SAS 6 Gbit/s interface enables fast server data transfers
- 7200 RPM spindle speed delivers responsive performance for workloads
- 1 TB capacity provides ample space for critical datasets
- 5-inch form factor fits standard enterprise drive bays
- Includes mounting tray for quick Dell system installation
Dell 342-2098 SAS drive
The Dell 342-2098 is a 1TB 3.5 inch internal hard drive spinning at 7200 RPM. It uses a Serial Attached SCSI interface and ships with a mounting tray. The unit is supplied new in bare drive packaging.
Server storage upgrades
This drive suits administrators adding capacity to compatible Dell servers or storage arrays that accept 3.5 inch SAS drives. Buyers whose systems require a different physical form factor or interface protocol should look at something else.
SAS 6 Gbit interface
The single specification that decides fit is the Serial Attached SCSI 6 Gbit interface. The host backplane or controller must support this exact connection standard for the drive to function.
Põhijooned
- SAS 6 Gbit/s interface enables fast server data transfers
- 7200 RPM spindle speed delivers responsive performance for workloads
- 1 TB capacity provides ample space for critical datasets
- 5-inch form factor fits standard enterprise drive bays
- Includes mounting tray for quick Dell system installation
Tehnilised andmed
| Brand | Dell |
|---|---|
| Model | 342-2098 |
| Packaging | Bare Drive |
| Interface | Serial Attached SCSI (SAS) |
| Capacity | 1TB |
| RPM | 7200 RPM |
| Usage | Ideal for Servers |
| Form Factor | 3.5" |
Küsimused selle toote kohta
What real-world throughput can I expect from the SAS 6 Gbit/s interface once the drive is installed in a server?
The SAS interface is rated at 6 Gbit/s, so sustained transfers will be limited by the drive’s 7200 RPM mechanical speed rather than the link bandwidth.
Does the SAS 6 Gbit/s connection require a specific backplane or controller to reach its rated speed?
A SAS 6 Gbit/s controller or backplane is needed; the drive will negotiate down to 3 Gbit/s if connected to an older 3 Gbit/s SAS port.
Will the included tray fit a standard 3.5-inch drive bay in a Dell PowerEdge server?
The drive ships with a Dell tray designed for 3.5-inch hot-swap bays in compatible PowerEdge and Precision systems.
Veel samast osakonnast
Kliendid võrdlesid neid ka
Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.
