DELL
DELL 401-ABEE 8TB 3.5" SAS 12Gb/s 7200 RPM internal hard drive
An 8 TB 3.5-inch internal hard drive with a 12 Gb/s SAS interface spinning at 7200 RPM for nearline storage workloads
- PackagingBare Drive
- InterfaceSAS 12Gb/s
- Capacity8TB
- RPM7200 RPM
- Form Factor3.5"
- 8 TB capacity stores large datasets and backups
- SAS 12 Gb/s interface moves data quickly to the controller
- 7200 RPM spindle speed keeps read and write latency low
- 5 inch form factor fits standard desktop drive bays
- Dell part 401-ABEE ensures compatibility with supported Dell systems
Dell 8TB 3.5" Nearline SAS Drive
The Dell 401-ABEE is an 8TB 3.5" internal hard drive built for desktop and server storage bays. It spins at 7200 RPM and connects through a 12Gb/s SAS interface. The bare-drive package carries Dell part number 401-ABEE and is supplied new.
Suited for SAS-based arrays and Dell systems
This drive fits workflows that need high-capacity nearline storage on a 12Gb/s SAS backbone. It is not for systems that lack a SAS host bus adapter or backplane, nor for users who require solid-state latency or a different physical form factor.
12Gb/s SAS interface decides compatibility
The single specification that determines fit is the 12Gb/s SAS interface; the drive must attach to a controller or backplane that supports this exact protocol and speed. Without that connection the 8TB capacity and 7200 RPM spindle cannot be used.
Põhijooned
- 8 TB capacity stores large datasets and backups
- SAS 12 Gb/s interface moves data quickly to the controller
- 7200 RPM spindle speed keeps read and write latency low
- 5 inch form factor fits standard desktop drive bays
- Dell part 401-ABEE ensures compatibility with supported Dell systems
Tehnilised andmed
| Brand | Dell |
|---|---|
| Model | 401-ABEE |
| Packaging | Bare Drive |
| Interface | SAS 12Gb/s |
| Capacity | 8TB |
| RPM | 7200 RPM |
| Form Factor | 3.5" |
Küsimused selle toote kohta
Will the 12Gb/s SAS interface work with my existing 6Gb/s SAS backplane?
Yes, the drive negotiates down to 6Gb/s automatically; you will see the link speed reported as 6Gb/s in the controller BIOS.
How can I confirm the 7200 RPM spindle is running after installation?
Listen for the characteristic spin-up whine and verify 7200 RPM in the SMART data or RAID controller dashboard.
Does the bare 3.5" drive ship with a mounting tray or cables?
No, it is a bare drive only; you must supply a compatible 3.5" tray and SAS data and power cables yourself.
Veel samast osakonnast
Kliendid võrdlesid neid ka
Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.
