Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.

Hinnavaatlus Logi sisse
Black 2U rack-mount server chassis with eight 3.5-inch drive bays

DELL

DELL PowerEdge R730 8x3.5" 2x Xeon E5-2683 v4 192GB DDR4

SKU CH-9TF9-KXYMZ

A 2U rack server holding eight 3.5-inch drives, dual 16-core Xeon processors at 2.1 GHz and 192 GB DDR4 ECC memory with a PERC H730 SAS controller and dual 10 GbE networking

  • TypeRack
  • CPU TypeIntel Xeon
  • CPU Speed2.1GHz
  • # of Processors Installed2
  • MAX Processors2
  • Installed Memory Size192GB
  • Dual 16-core Xeon processors at 2.1GHz for heavy workloads
  • 192GB DDR4 ECC memory supports large datasets
  • Eight 3.5" drive bays with PERC H730 SAS controller
  • Integrated iDRAC8 Enterprise enables remote management
  • Dual 495W supplies and Intel 10GbE networking built in

Dual 16-core Xeon server for dense compute

The Dell PowerEdge R730 packs two Xeon E5-2683 v4 processors running at 2.1 GHz with 16 cores each and 192 GB of DDR4 ECC registered memory. It targets workloads that need high thread counts and large memory capacity such as virtualization hosts, database nodes or rendering farms. Buyers who need GPU acceleration or single-thread speed above 2.1 GHz should look elsewhere.

Dual 495 W supplies and iDRAC8 remote control

Two 495 W power supplies deliver redundancy for the 24-drive chassis while the integrated iDRAC8 Enterprise licence gives full out-of-band management over a dedicated network port. The PERC H730 SAS controller handles RAID across eight 3.5-inch SATA bays. The system ships with firmware updated and burn-in tested.

No drives or rails included by default

Storage drives are not installed so you can select capacity and endurance that match the workload. Rail kits are available on request rather than bundled. The onboard Intel I350 and X540 adapters provide two 10 GbE and two 1 GbE ports for flexible network topology.

Põhijooned

  • Dual 16-core Xeon processors at 2.1GHz for heavy workloads
  • 192GB DDR4 ECC memory supports large datasets
  • Eight 3.5" drive bays with PERC H730 SAS controller
  • Integrated iDRAC8 Enterprise enables remote management
  • Dual 495W supplies and Intel 10GbE networking built in

Tehnilised andmed

BrandDELL
SeriesPowerEdge
ModelRack Mount
TypeRack
CPU TypeIntel Xeon
CPU Speed2.1GHz
# of Processors Installed2
MAX Processors2
Installed Memory Size192GB
Memory TypeDDR4
Max Memory Capacity768GB
Hard Drive (Installed)8,00
Storage ControllerDell PERC H730 SAS Controller
HDD InterfaceSATA
GPU TypeIntegrated Graphics
Remote ManagementiDRAC8 - Enterprise License
Dimensions36 x 24 x 10 in
Weight40

Küsimused selle toote kohta

How do I install the server into a rack and what step is often missed?

Mount the server using the sliding rail kit, then secure the front thumbscrews — many people forget to tighten those screws and the unit can shift under vibration.

Which components will need replacement during the server's service life?

The two 495 W hot-plug power supplies and the system fans are the primary field-replaceable units; drive bays accept 3.5" SATA or SAS drives that can be swapped without tools.

What thermal limit appears first when both 16-core Xeon E5-2683 v4 CPUs run at 2.1 GHz continuously?

The dual 495 W power supplies set the sustained power ceiling; if total draw approaches 800 W the system will throttle to stay within the PSU rating.

Veel samast osakonnast

Kliendid võrdlesid neid ka

Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.