DELL
DELL ST2000NM0023 2TB 7.2K 3.5" SAS internal hard drive
A 2 TB 3.5" SAS drive spinning at 7.2 K rpm for Dell PowerEdge servers
- 2 TB capacity for enterprise storage workloads
- 2 K spindle speed supports sustained throughput
- 5 inch LFF form factor fits standard server bays
- SAS 6 Gb/s interface connects to PowerEdge controllers
- Hot-swap design enables drive replacement without downtime
Enterprise SAS drive for Dell PowerEdge servers
This Dell Enterprise Plus hard drive provides 2TB of storage on a 3.5 inch form factor with a SAS interface. It spins at 7.2K RPM and is designed for Dell PowerEdge server environments. The drive is sold new and intended for enterprise storage arrays rather than home desktop computers.
Hot-swap 3.5 LFF build with tray considerations
The drive uses a 3.5 LFF form factor built for hot-swap bays in compatible Dell PowerEdge servers. A tray sticker may not be included with the unit, so installers should verify tray compatibility at checkout. The SAS 6Gbps interface connects directly to supported backplanes for straightforward insertion and removal.
Verify server tray and SAS controller before
Buyers must confirm the correct HDD tray for their specific Dell PowerEdge model before purchase. The drive requires a SAS controller or backplane that supports 6Gbps SAS connections. It is not suitable for standard home PCs lacking SAS infrastructure or appropriate drive trays.
Põhijooned
- 2 TB capacity for enterprise storage workloads
- 2 K spindle speed supports sustained throughput
- 5 inch LFF form factor fits standard server bays
- SAS 6 Gb/s interface connects to PowerEdge controllers
- Hot-swap design enables drive replacement without downtime
Tehnilised andmed
Selle toote kohta ei ole veel tehnilisi andmeid avaldatud.
Küsimused selle toote kohta
What SAS interface speed does this 2TB drive use?
The drive uses a 6Gb/s SAS interface, which caps real-world throughput at that link rate.
What physical space and mounting does this 3.5 LFF drive require?
It fits a standard 3.5-inch LFF bay and uses hot-swap trays compatible with Dell PowerEdge servers.
How is this drive installed in a PowerEdge server, and what step is often missed?
Mount the drive in the correct hot-swap tray for your PowerEdge model, then insert it into the bay; the tray must match the server chassis.
Veel samast osakonnast
Kliendid võrdlesid neid ka
Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.
HP 628059-B21 3TB 7200 RPM SATA 3.0Gb/s 3.5" internal hard drive
- Bare Drive
- SATA 3.0Gb/s
Seagate Cheetah 10K.7 ST3300007LC 300GB 10000 RPM 8MB SCSI Ultra320 80pin 3.5" internal hard drive
- Bare Drive
- SCSI Ultra320 80pin
IBM 49Y2003 600GB 2.5" SAS 10000 RPM 16MB internal hard drive
- SAS 6Gb/s
- 10000 RPM



