Thermalright MC-2 ARGB Memory Cooler White 3200 RPM
- Fan & Heatsinks
- DDR/DDR2/DDR3/DDR4/…
Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.
Dynatron
Low-profile 75 mm dual-ball-bearing fan on a copper heatsink fits Intel LGA 1156, 1155 and 1151 sockets in 28 mm height
The Dynatron K2 is a low-profile CPU air cooler built for Mini-ITX systems. It mounts vertically on Intel LGA 1156, 1155 and 1151 sockets using a copper heatsink and a 75 mm dual-ball-bearing fan. The total assembly height is 28 mm, fitting tight chassis clearances.
This cooler serves builders using supported Core i3, Core i5 or Pentium processors on the three listed LGA platforms. Buyers with different Intel sockets or non-Intel platforms cannot use this cooler. It also does not suit cases that require a cooler taller than 28 mm.
The single specification that determines compatibility is the 28 mm overall height. Measure the space between the motherboard and the side panel or any overhead component; if the gap is 28 mm or less, the K2 will install. If the gap is smaller, a different low-profile solution is required.
| Brand | Dynatron |
|---|---|
| Model | K2 |
| Type | Fan & Heatsinks |
| Fan Size | 75mm |
| CPU Socket Compatibility | Intel LGA 1156 / 1155 / 1151 |
| Bearing Type | 2 Ball |
| RPM | At Duty Cycle 20%: 1000 RPM At Duty Cycle 50%: 2500 RPM At Duty Cycle 100%: 4000 RPM |
| Air Flow | At Duty Cycle 20%: 6.0 CFM At Duty Cycle 50%: 8.3 CFM At Duty Cycle 100%: 11.9 CFM |
| Noise Level | At Duty Cycle 20%: 21.0 dBA At Duty Cycle 50%: 37.8 dBA At Duty Cycle 100%: 44.0 dBA |
| Power Connector | 4 Pin |
| Heatsink Material | Copper |
| Fan Mounting Types to Heatsink | Vertical |
| Max CPU Cooler Height | 28 mm |
| Fan Dimensions | 75 x 75 x 15 mm |
| Heatsink Dimensions | 82.6 x 81.0 x 27.8 mm |
| Features | CPU Support: Intel Core i3 Processor I3-530, I3-540; Core i5 Processor I5-650, 660, 670, 680; Pentium Desktop Processor G6950 Solution: Mini-ITX form factor |
| Tarnekaal | 0.45 kg |
| Pakendi mõõtmed | 112 × 112 × 69 mm |
The cooler supports LGA 1156, 1155 and 1151; your i5-660 uses LGA 1156, so this single model covers it.
At 100 % duty cycle the fan spins at 4000 RPM and produces 44.0 dBA, which is audible but typical for a compact 75 mm cooler under load.
The 4-pin PWM header lets the motherboard vary the duty cycle from 20 % (1000 RPM, 6.0 CFM, 21.0 dBA) up to 100 % (4000 RPM, 11.9 CFM, 44.0 dBA).
Veel samast osakonnast
Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.
See, millega maksate, ja see, milles vaatate hindu.
Saadetud teie rahakotist kassas
Ainult kuvamiseks — kataloogi hinnad on dollarites
Ükski vääring ei vasta sellele.
Valige keel, milles sait teiega räägib.
Esimest korda siin?
Teil on juba konto?
Automaatset lähtestamist ei ole: see pood ei saada ühtegi e-kirja, seega pole ka ühekordset linki, mida küsida. Jätke aadress kontole alles, seda käsitletakse käsitsi.
Päring registreeritud
Teie postkasti ei jõua midagi — see pood ei saada e-kirju üldse. Keegi tegeleb sellega käsitsi.
Tuli meelde?