Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.

Hinnavaatlus Logi sisse

EVGA

EVGA GeForce RTX 2070 SUPER XC ULTRA+ 08G-P4-3175-KR graphics card

SKU CH-WEAF-K5VEZ MPN 08G-P4-3175-KR

Refurbished GeForce RTX 2070 SUPER with 8 GB GDDR6, 2560 CUDA cores, 1800 MHz boost clock and dual-fan 2.75-slot cooler

  • InterfacePCI Express 3.0
  • Chipset ManufacturerNVIDIA
  • GPUGeForce RTX 2070 SUPER
  • Boost Clock1800 MHz
  • CUDA Cores2560
  • Effective Memory Clock15500 MHz
  • Boost clock reaches 1800 MHz for higher frame rates
  • 2560 CUDA cores accelerate parallel workloads
  • 8 GB GDDR6 on 256-bit bus delivers 15500 MHz bandwidth
  • Dual HDB fans with 2.75-slot cooler run quieter under load
  • Four display outputs plus USB Type-C drive 7680 x 4320 resolution

Refurbished RTX 2070 SUPER for 1440p gaming

The EVGA GeForce RTX 2070 SUPER XC ULTRA+ is a refurbished graphics card built on the NVIDIA RTX architecture. It carries 8 GB of GDDR6 memory across a 256-bit interface and 2560 CUDA cores. A factory boost clock of 1800 MHz drives high frame rates at 1440p resolution. The PCI Express 3.0 interface fits most modern motherboards without adapter cables.

Dual HDB fans sustain clocks under 235 W load

Two hydraulic dynamic bearing fans move air across a heatsink that occupies 2.75 expansion slots. The cooler is rated for the card's 235 W thermal design power, keeping the GPU near its 1800 MHz boost during extended sessions rather than throttling after a short burst. An all-metal backplate adds structural rigidity and helps distribute heat away from the PCB during long rendering or gaming workloads.

Check 650 W PSU and dual power connectors first

Your power supply must deliver at least 650 W and provide both a 6-pin and an 8-pin PCIe power connector. The card measures 270 mm in length and stands 4.38 inches tall, so confirm case clearance for a 10.62-inch dual-slot-plus design. A PCI Express 3.0 compliant slot is required, and the system should run Windows 10 or Windows 7 64-bit for driver support.

Põhijooned

  • Boost clock reaches 1800 MHz for higher frame rates
  • 2560 CUDA cores accelerate parallel workloads
  • 8 GB GDDR6 on 256-bit bus delivers 15500 MHz bandwidth
  • Dual HDB fans with 2.75-slot cooler run quieter under load
  • Four display outputs plus USB Type-C drive 7680 x 4320 resolution

Tehnilised andmed

BrandEVGA
Model08G-P4-3175-KR
InterfacePCI Express 3.0
Chipset ManufacturerNVIDIA
GPUGeForce RTX 2070 SUPER
Boost Clock1800 MHz
CUDA Cores2560
Effective Memory Clock15500 MHz
Memory Size8GB
Memory Interface256-Bit
Memory TypeGDDR6
DirectXDirectX 12
OpenGLOpenGL 4.5
Multi-Monitor Support4
HDMI1 x HDMI 2.0b
DisplayPort3 x DisplayPort 1.4
Other Ports1 x USB Type-C
Max Resolution7680 x 4320
SLI SupportSLI Ready
Virtual Reality ReadyYes
CoolerDouble Fans
Operating Systems SupportedWindows 10 64-bit, Windows 7 64-bit ‍👉Check gaming pc with Windows 11 Pro
Thermal Design Power235W
System Requirements650-Watt or greater power supply.
PCI Express, PCI Express 2.0 or PCI Express 3.0 compliant motherboard with one graphics slot.
An available 6-pin PCIe power connector and an available 8-pin PCIe power connector.
HDCP Ready2.2
Max GPU Length270 mm
Card Dimensions (L x H)10.62" x 4.38"
Slot Width2.75 Slots
Tarnekaal1.86 kg
Pakendi mõõtmed376 × 239 × 124 mm

Küsimused selle toote kohta

How loud and hot does the 2.75-slot dual-fan cooler run at the 235W TDP?

The dual HDB fans are designed for higher cooling performance with quieter acoustic noise while handling the 235W thermal design power.

Which power connectors and PSU rating are required for the 8-pin and 6-pin inputs?

A 650W or greater power supply with one available 8-pin and one available 6-pin PCIe power connector is needed.

Will the 270 mm length and 2.75-slot width fit alongside existing cards in a standard ATX case?

The card measures 270 mm long and occupies 2.75 slots, so verify case clearance and motherboard spacing before installing.

Veel samast osakonnast

Kliendid võrdlesid neid ka

Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.