HPE
HPE 240GB SATA Solid State Drive 764916-B21
240 GB SATA solid-state drive for HPE ProLiant servers, part 764916-B21
- NAND Flash Memory TypeSolid State Drive
- 240 GB capacity for faster boot and load times
- SATA 3 Gb/sec interface for broad server compatibility
- HPE SmartSSD Wear Gauge support enables drive-health monitoring
- Hot-plug SFF and LFF options give flexible installation
- Lower power draw than traditional rotating hard drives
HPE 240GB SATA Solid State Drive
The HPE 240GB SATA Solid State Drive is a new internal storage device built for HP ProLiant server platforms. It uses NAND flash technology to deliver higher performance and lower latency than traditional rotating hard drives. The drive reduces power consumption while supporting demanding workloads that require high random read and write IOPs.
SATA 3Gb/sec interface
This drive connects through a SATA interface rated at 3Gb/sec, which is the single specification that determines whether it matches your server's backplane or controller. The part number 764916-B21 identifies the exact model for compatibility checks. No other interface or protocol is supported by this unit.
Fits ProLiant Gen9 and storage platforms
The SSD installs in Small Form Factor or Large Form Factor hot-plug bays, non-hot-plug SFF slots or SFF Quick Release carriers, giving flexibility inside supported HPE systems. HP SmartSSD Wear Gauge compatibility lets management tools monitor drive life and help prevent data loss. Buyers needing a faster interface or a different form factor not listed here should verify their platform requirements before ordering.
Põhijooned
- 240 GB capacity for faster boot and load times
- SATA 3 Gb/sec interface for broad server compatibility
- HPE SmartSSD Wear Gauge support enables drive-health monitoring
- Hot-plug SFF and LFF options give flexible installation
- Lower power draw than traditional rotating hard drives
Tehnilised andmed
| Brand | HPE |
|---|---|
| NAND Flash Memory Type | Solid State Drive |
Küsimused selle toote kohta
How does the 240 GB capacity translate to usable space once the drive is installed in a server?
The drive provides 240 GB of raw storage; after formatting and any server firmware overhead the available space will be slightly lower, which is normal for all SSDs.
What does the SATA 3Gb/sec interface mean for actual transfer speeds in a ProLiant Gen9 system?
The SATA 3Gb/sec link sets the maximum interface bandwidth; real-world throughput will be limited by that link speed and the drive’s own controller performance.
Which drive bay type does the SFF hot-plug form factor require for installation?
This SFF hot-plug SSD fits directly into a 2.5-inch hot-plug drive bay on supported HPE ProLiant servers.
Veel samast osakonnast
Kliendid võrdlesid neid ka
Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.
