Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.

Hinnavaatlus Logi sisse
Silver 2U rack server front with drive bays and HPE badge

HPE

HPE ProLiant DL380 Gen11 2U rack server Dual Xeon 6430 32-Core 2.1GHz 1TB DDR5 15.36TB SATA SSD iLO rail kit

SKU CH-6EMQ-XG3WB

2U rack server with dual Xeon 6430 32-core CPUs, 1 TB DDR5 memory and 15.36 TB SATA SSD storage

  • Dual Xeon Gold 6430 processors with 32 cores each at 2.1 GHz turbo to 3.4 GHz
  • 1 TB DDR5-4800 ECC memory using 16 modules of 64 GB for high bandwidth
  • 36 TB enterprise SATA SSD storage across eight 1.92 TB drives for fast capacity
  • Redundant hot-swap power supplies keep the server running during a module replacement
  • iLO 6 remote management with Intelligent Provisioning simplifies deployment and monitoring

Dual Xeon 6430 compute density

The HPE ProLiant DL380 Gen11 is a 2U rack server built around dual Xeon Gold 6430 processors, each with 32 cores at 2.1 GHz and 60 MB cache boosting to 3.40 GHz. It targets organisations that need high core counts for virtualisation, databases or parallel workloads in a space-efficient chassis.

1 TB DDR5-4800 and 15.36 TB SATA SSD capacity

Sixteen 64 GB DDR5-4800 PC5-38400 ECC modules provide 1 TB of buffered memory, giving ample headroom for large VM fleets or in-memory databases. Eight 1.92 TB enterprise SATA 6 Gb/s SSDs deliver 15.36 TB of hot-swap storage suited to read-heavy workloads, while write-intensive tasks will saturate the SATA interface sooner.

PCIe Gen5 lanes and OCP 3.0 networking limits

The MR408i-o Gen11 storage controller uses eight PCIe Gen5 lanes with 4 GB cache, so storage throughput scales with drive count until the x8 link saturates. The embedded OCP 3.0 adapter supplies four 1 GbE ports, capping east-west traffic at gigabit speeds unless an additional mezzanine card is added.

Põhijooned

  • Dual Xeon Gold 6430 processors with 32 cores each at 2.1 GHz turbo to 3.4 GHz
  • 1 TB DDR5-4800 ECC memory using 16 modules of 64 GB for high bandwidth
  • 36 TB enterprise SATA SSD storage across eight 1.92 TB drives for fast capacity
  • Redundant hot-swap power supplies keep the server running during a module replacement
  • iLO 6 remote management with Intelligent Provisioning simplifies deployment and monitoring

Tehnilised andmed

Selle toote kohta ei ole veel tehnilisi andmeid avaldatud.

Küsimused selle toote kohta

Will the dual Xeon 6430 CPUs and 1 TB DDR5-4800 memory work with my existing PCIe Gen4 expansion cards?

The server supports PCIe Gen5 slots, which are backward compatible with PCIe Gen4 cards, so your existing adapters will function at Gen4 speeds.

How can I confirm the MR408i-o storage controller sees all eight 1.92 TB SATA SSDs after I install them?

During boot, open the controller BIOS or use HPE iLO 6 remote console to view the logical drive configuration showing all 15.36 TB of SSD capacity.

The listing says drives and memory ship separately — what exactly arrives in the box and what must I source myself?

The box contains the 2U chassis with dual Xeon 6430 processors, 16 x 64 GB DDR5 modules, 8 x 1.92 TB SATA SSDs, dual redundant power supplies, iLO 6 module and rail kit; no extra parts are required.

Veel samast osakonnast

Kliendid võrdlesid neid ka

Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.