IBM
IBM 42D0782 2TB 7200 RPM SATA 3.0Gb/s 3.5" internal hard drive
A 2 TB, 7200 RPM SATA 3.0 Gb/s 3.5-inch bare drive for desktop storage
- PackagingBare Drive
- InterfaceSATA 3.0Gb/s
- Capacity2TB
- RPM7200 RPM
- Average Latency6Gb/s
- Features42D0782 Serial ATA/300 Hard Drive Installation Pub and Warra
- 2 TB capacity stores large media libraries
- 7200 RPM spindle delivers fast sequential throughput
- SATA 3.0 Gb/s interface connects to standard desktop controllers
- 5 inch form factor fits regular drive bays
- New bare drive ready for immediate installation
3.5" 2 TB SATA desktop drive
This 3.5-inch internal hard drive offers 2 TB of storage on a SATA 3.0Gb/s interface. It spins at 7200 RPM and is supplied as a bare drive. The unit is new and designed for standard desktop bays.
Suits desktops needing high-capacity SATA storage
It fits desktop systems with a free 3.5-inch bay and a SATA 3.0Gb/s port. It does not suit laptops or compact devices that require 2.5-inch drives. Builders without a SATA connection should look elsewhere.
SATA 3.0Gb/s interface
The drive connects via a SATA 3.0Gb/s interface, also referred to as Serial ATA/300. This single specification determines whether the drive is compatible with the host system.
Põhijooned
- 2 TB capacity stores large media libraries
- 7200 RPM spindle delivers fast sequential throughput
- SATA 3.0 Gb/s interface connects to standard desktop controllers
- 5 inch form factor fits regular drive bays
- New bare drive ready for immediate installation
Tehnilised andmed
| Brand | IBM |
|---|---|
| Model | 42D0782 |
| Packaging | Bare Drive |
| Interface | SATA 3.0Gb/s |
| Capacity | 2TB |
| RPM | 7200 RPM |
| Average Latency | 6Gb/s |
| Features | 42D0782 Serial ATA/300 Hard Drive Installation Pub and Warranty Safety flyer |
| Form Factor | 3.5" |
| Tarnekaal | 1.22 kg |
| Pakendi mõõtmed | 267 × 229 × 127 mm |
Küsimused selle toote kohta
How much heat and noise does the 7200 RPM 3.5" mechanism produce during continuous operation?
The 7200 RPM spindle speed generates typical desktop-class heat and audible seek noise; ensure your chassis has adequate airflow over the 3.5" drive bay for all-day use.
Which host connector and physical bay does the SATA 3.0Gb/s interface require?
A motherboard or controller with a standard SATA 3.0Gb/s port plus a free 3.5" drive bay and both SATA data and power cables are needed for installation.
Will the SATA 3.0Gb/s link limit throughput on an older SATA 1.5Gb/s controller?
The drive negotiates down to 1.5Gb/s on legacy controllers, so it functions correctly but maximum sequential transfer rate is capped at the slower bus speed.
Veel samast osakonnast
Kliendid võrdlesid neid ka
Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.
