Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.

Hinnavaatlus Logi sisse
Green 405nm LCD UV curing resin bottle 500g

INLAND

INLAND 405nm LCD UV Curing Resin Green 500G 3d printers accessory

SKU CH-FHQ0-8RH9R

Green photopolymer resin for 405 nm LCD printers, 500 g bottle, 28–35 % elongation and 46–67 MPa tensile strength

  • Low-odour printing for a more pleasant workspace
  • Non-toxic formulation reduces handling risk
  • 46–67 MPa tensile strength produces durable parts
  • 28–35 % elongation allows functional flexibility
  • 88 Shore D hardness delivers rigid, detailed models

Resin for LCD UV Printers

This green photopolymer resin is formulated for 405 nm LCD printers that use LED UV light sources. It suits hobbyists and small-shop operators who need a standard material for general-purpose models. The 500 g bottle provides enough volume for multiple prints without frequent reordering. Low odour and non-toxic handling make it practical for home or office environments.

Upgrade from basic resins

Users moving from entry-level resins that warp or leave sticky surfaces will notice tighter dimensional stability and a harder finish at 88 shore D. The jump is worth it when functional parts need tensile strength between 46 and 67 MPa and elongation at break of 28 to 35 percent. Builders who only print decorative miniatures may not require the extra mechanical headroom.

Limits of 405 nm LCD curing

The resin cures only under 405 nm LED UV light, so it will not work with laser-based SLA or DLP systems that use different wavelengths. Viscosity and density of 1.08 to 1.13 g/cm³ mean thicker layers can trap bubbles if the printer lacks a robust peel mechanism. Large solid parts over several hundred grams may develop internal stress without hollowed designs and drain holes.

Põhijooned

  • Low-odour printing for a more pleasant workspace
  • Non-toxic formulation reduces handling risk
  • 46–67 MPa tensile strength produces durable parts
  • 28–35 % elongation allows functional flexibility
  • 88 Shore D hardness delivers rigid, detailed models

Tehnilised andmed

BrandInland

Küsimused selle toote kohta

Will the 105.92 mm wide by 103.89 mm deep bottle fit on my printer's resin shelf?

The bottle measures 105.92 mm wide by 103.89 mm deep, so check your shelf clearance against those dimensions.

How do I prepare this 405 nm resin before pouring it into the vat?

Shake the 500 g bottle thoroughly for several minutes to redistribute settled pigment, then let bubbles rise before pouring.

When should I replace the resin if prints start failing?

Replace it when the liquid thickens noticeably, develops a strong odor, or cured test pieces no longer reach the 28 to 35 % elongation range.

Veel samast osakonnast

Kliendid võrdlesid neid ka

Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.