Intel
Intel D3-S4610 7.68TB SATA 2.5" Enterprise SSD SSDSC2KG076T801
- 2.5"
- 7.68TB
3 786,99 $
0.04889783BTC
Laos
Intel
Intel D3-S4510 7.68TB enterprise SSD 2.5" Sata
A 7.68 TB Sata enterprise SSD delivering 560 MBps read and 490 MBps write with 1.2 PBW endurance and AES 256-bit encryption
- Form Factor2.5"
- Capacity7.68TB
- Memory Components3D2, TLC
- InterfaceSATA III
- Max Sequential ReadUp to 560 MBps
- Max Sequential WriteUp to 490 MBps
Options 7.68TB
- 7.68TB
- 3.84TB
- 1.92TB
- 960GB
- 480GB
- 240GB
Läbikriipsutatud versioonid on olemas, kuid neid pole siin saadaval.
- 68TB capacity fits read-intensive workloads in legacy SATA bays
- 560MB/s sequential read accelerates data access over HDDs
- 2,000,000-hour MTBF supports long-term server reliability
- AES 256-bit hardware encryption secures data at rest
- Enhanced power loss protection guards writes during unexpected outages
Intel D3-S4510 7.68TB SATA Enterprise SSD
This 2.5-inch solid-state drive uses 3D TLC NAND and a SATA III 6Gb/s interface to deliver 7.68TB of storage for read-intensive server workloads. Sequential reads reach 560 MB/s while writes hit 490 MB/s with latencies of 36 µs and 37 µs respectively. End-to-end data protection, AES 256-bit hardware encryption and enhanced power-loss protection safeguard data integrity. The drive is rated for 1.2 PBW endurance and 2,000,000 hours MTBF.
Suits read-heavy arrays.
This drive targets servers that need high-capacity, low-latency reads within existing SATA backplanes and controllers. It operates at 1.0W idle and 3.0W active across a 0°C to 70°C range with 1000G shock resistance. Buyers who need higher write endurance or a different interface should look at other enterprise SSDs.
7.68TB capacity decides fit
The single specification that determines whether this is the right part is the 7.68TB usable capacity combined with the SATA III interface. If the storage array or server bay requires this exact capacity and a 2.5-inch 7mm SATA form factor, the D3-S4510 matches; otherwise a different drive is required.
Põhijooned
- 68TB capacity fits read-intensive workloads in legacy SATA bays
- 560MB/s sequential read accelerates data access over HDDs
- 2,000,000-hour MTBF supports long-term server reliability
- AES 256-bit hardware encryption secures data at rest
- Enhanced power loss protection guards writes during unexpected outages
Tehnilised andmed
| Brand | Intel |
|---|---|
| Series | D3-S4510 |
| Model | SSDSC2KB480G801 |
| Part Number | SSDSC2KB480G801 |
| Form Factor | 2.5" |
| Capacity | 7.68TB |
| Memory Components | 3D2, TLC |
| Interface | SATA III |
| Max Sequential Read | Up to 560 MBps |
| Max Sequential Write | Up to 490 MBps |
| Read Latency | 36 µs |
| Write Latency | 37 µs |
| MTBF | 2,000,000 hours |
| Features | Endurance Rating (Lifetime Writes) 1.2 PBW Enhanced Power Loss Data Protection: Yes Hardware Encryption: AES 256-bit Temperature Monitoring and Logging: Yes End-to-End Data Protection: Yes Compatible with existing SATA setups for an easy storage upgrade Up to 6x lower power and lower cooling requirements than 2.5-inch HDDs 3.2x more data in the same amount of space Up to 4.2x lower annualized failure rates (AFR) for fewer drive replacements Up to 300x more IOPS/TB than HDDs |
| Power Consumption (Idle) | 1.0W |
| Power Consumption (Active) | 3.0W |
| Operating Temperature | 0°C ~ +70°C |
| Max Shock Resistance | 1000G / 0.5 msec |
| Max Vibration Resistance | Operating: 2.17 GRMS Non-Operating: 3.13 GRMS |
| Height | 7.00mm |
| Width | 5.800 |
| Weight | 0.26 |
Selle mudeli teised versioonid
1 veel samast sarjast
Sama seeria, erinev mälumaht, jahutus või taktsagedus — võrrelge enne otsustamist.
Küsimused selle toote kohta
What SATA host interface does the Intel D3-S4510 7.68TB drive require for full 560 MBps read performance?
The drive uses a SATA III 6Gb/s interface. Connect it to a SATA 6Gb/s port on the motherboard or RAID controller to achieve the rated 560 MBps sequential read and 490 MBps sequential write speeds.
Can the Intel D3-S4510 7.68TB SSD replace a 3.5" hard drive in a legacy server backplane?
The drive has a 2.5"/7mm form factor. It fits 2.5" hot-swap bays directly; a 3.5" bay needs a 2.5"-to-3.5" adapter bracket. The SATA III 6Gb/s interface works with existing SATA backplanes and controllers.
How can I verify the Intel D3-S4510 7.68TB SSD is operating within specification after installation?
Check SMART attributes for temperature (0–70 °C range), media wear indicator, and power-on hours. Latency should be near 36 µs read and 37 µs write. The drive also logs temperature history and supports end-to-end data protection status reporting.
Veel samast osakonnast
Kliendid võrdlesid neid ka
Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.
