ITEMPOWERS
ITEMPOWERS 8GB DDR4 3200MHz 260-Pin UDIMM
An 8 GB DDR4 desktop module running at 3200 MHz with CL22 latency, 1.2 V operation and 260-pin unbuffered design for straightforward multitasking upgrades
- Capacity8GB
- Type260-Pin DDR4 U-DIMM
- CAS LatencyCL22
- Timing22-22-55-52
- ECCNon-ECC
- Buffered/RegisteredUnbuffered
Capacity 8GB
- 16GB
- 8GB
Memory Type DDR4 3200MHz
- DDR3 1600MHz
- DDR4 3200MHz
- 8GB capacity boosts multitasking for everyday desktop use
- 3200MHz DDR4 speed raises data throughput to PC4-25600
- CL22 22-22-55-52 timings deliver stable operation at standard latency
- 2V low voltage cuts power draw and heat output
- 260-pin unbuffered non-ECC design fits most DDR4 desktop motherboards
8GB DDR4 3200MHz U-DIMM
This 8GB DDR4 module runs at 3200MHz with CL22 timing and 1.2V operation. It uses a 260-pin U-DIMM form factor and is unbuffered non-ECC memory. The single stick suits desktop systems that need a straightforward capacity increase.
Upgrade from 1600MHz DDR3 or slower DDR4
Moving from DDR3 1600MHz or lower-speed DDR4 to this 3200MHz DDR4 module raises bandwidth to PC4-25600. The jump is worthwhile when the motherboard supports DDR4 and has a free DIMM slot for the 260-pin design.
Fits standard desktop DDR4 builds
The module requires a motherboard with DDR4 DIMM slots that accept 260-pin U-DIMMs. It draws 1.2V and adds 8GB in a single channel, leaving remaining slots open for future expansion. No heat spreader means it fits in tighter spaces.
Põhijooned
- 8GB capacity boosts multitasking for everyday desktop use
- 3200MHz DDR4 speed raises data throughput to PC4-25600
- CL22 22-22-55-52 timings deliver stable operation at standard latency
- 2V low voltage cuts power draw and heat output
- 260-pin unbuffered non-ECC design fits most DDR4 desktop motherboards
Tehnilised andmed
| Brand | ITEMPOWERS |
|---|---|
| Series | DDR4 desktop Memory |
| Model | 8GB 3200MHz U-DIMM |
| Part Number | IPSTD01DR40832UDIM |
| Capacity | 8GB |
| Type | 260-Pin DDR4 U-DIMM |
| CAS Latency | CL22 |
| Timing | 22-22-55-52 |
| ECC | Non-ECC |
| Buffered/Registered | Unbuffered |
| Multi-channel Kit | Single Channel |
| Heat Spreader | No |
| Features | 3200MHz, 1.2V, 260-Pin |
| Recommend Use | desktop |
Selle mudeli teised versioonid
5 veel samast sarjast
Sama seeria, erinev mälumaht, jahutus või taktsagedus — võrrelge enne otsustamist.
ITEMPOWERS 8GB DDR3 1600MHz CL11 1.5V 240-Pin Desktop RAM
- 8GB
- 240-Pin PC RAM
ITEMPOWERS 8GB DDR4 3200MHz CL22 260-Pin SO-DIMM laptop RAM
- 8GB
- 260-Pin DDR4 SO-DIMM
ITEMPOWERS 16GB DDR4 3200MHz CL22 260-Pin UDIMM desktop RAM
- 16GB
- 260-Pin DDR4 U-DIMM
ITEMPOWERS 16GB DDR4 3200MHz CL22 260-Pin SO-DIMM Laptop RAM
- 16GB
- 260-Pin DDR4 SO-DIMM
Küsimused selle toote kohta
Will this module fit a standard desktop DDR4 motherboard slot?
Yes, it uses the 288-pin UDIMM form factor required by desktop DDR4 boards.
Does the motherboard need to support 3200 MHz and CL22 timing for full speed?
The module runs at 3200 MHz with 22-22-55-52 timings; the board must support that speed and latency for rated performance.
Can I add this single 8 GB stick to an existing dual-channel kit?
It is a single-channel 8 GB module, so adding it will run in single-channel mode unless paired with an identical stick.
Veel samast osakonnast
Kliendid võrdlesid neid ka
Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.
NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
NEMIX RAM DDR5 ECC RDIMM 1.5TB 12x128GB 6400MHz CL52 1.1V 2Rx4 288-Pin Supermicro H14SST-GE
- 1.5TB (12 x 128GB)
- 288-Pin DDR5 RDIMM
NEMIX RAM DDR5 6400 ECC Registered RDIMM 1.5TB 12x128GB 2Rx4 CL52 1.1V Supermicro H14DSH memory upgrade
- 1.5TB (12 x 128GB)
- 288-Pin DDR5 RDIMM
NEMIX RAM DDR5 ECC RDIMM 2TB 16x128GB 6400MHz CL52 1.1V 2Rx4 Supermicro H14DSH
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM








