Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.

Hinnavaatlus Logi sisse
Two black DIMM modules with RGB light bars side by side

Kingston Technology Corp.

Kingston Technology Corp. KF572C38RSAK2-32 desktop RAM 32 GB 2 x 16 GB DDR5 7200 MHz CL38

SKU CH-50D3-T2H1G MPN KF572C38RSAK2-32

A 32 GB dual-channel DDR5 kit running at 7200 MHz with CL38 latency and Intel XMP 3.0 support

  • Capacity32GB (2 x 16GB)
  • BIOS/Performance ProfileIntel XMP 3.0
  • 32 GB dual-channel kit gives headroom for heavy workloads
  • 7200 MHz DDR5 speed feeds data to the CPU fast
  • CL38 latency keeps response tight under load
  • 45 V operation runs stable at rated frequency
  • Intel XMP 3.0 profile applies tuned timings in one step

FURY Renegade RGB DDR5-7200 kit

This Kingston FURY Renegade RGB kit delivers 32 GB of DDR5 memory across two 16 GB modules rated at 7200 MHz with CL38 timings. It operates at 1.45 V and uses Intel XMP 3.0 profiles for automatic configuration. The 288-pin DIMMs feature RGB lighting and a low-profile heatspreader measuring 301.6 mil thick.

Suited to high-refresh gaming

Builders who want factory-validated 7200 MHz performance with RGB aesthetics will appreciate the single-rank design and XMP 3.0 simplicity. Systems limited to lower DDR5 data rates or platforms without XMP support will not reach the rated speed. Buyers needing ECC error correction or registered modules should look elsewhere.

32 GB capacity for modern workloads

The 32 GB total handles current games, streaming and moderate video editing with comfortable headroom. Heavy virtualization, large-scale 3D rendering or memory-bound scientific workloads may exceed this capacity. The kit runs at PC5-57600 bandwidth when the platform and BIOS allow the full 7200 MHz transfer rate.

Põhijooned

  • 32 GB dual-channel kit gives headroom for heavy workloads
  • 7200 MHz DDR5 speed feeds data to the CPU fast
  • CL38 latency keeps response tight under load
  • 45 V operation runs stable at rated frequency
  • Intel XMP 3.0 profile applies tuned timings in one step

Tehnilised andmed

Capacity32GB (2 x 16GB)
BIOS/Performance ProfileIntel XMP 3.0
Tarnekaal0.16 kg
Pakendi mõõtmed339 × 112 × 20 mm

Küsimused selle toote kohta

Does this 7200 MHz DDR5 kit require a motherboard with Intel XMP 3.0 support to run at its rated speed?

Yes, the kit uses an Intel XMP 3.0 profile to reach 7200 MHz; the motherboard must support XMP 3.0 and the BIOS setting must be enabled.

Will these 1.45 V modules work safely in a system that currently runs 1.1 V DDR5 memory?

The modules operate at 1.45 V; the motherboard and CPU memory controller must support that voltage for stable operation alongside any existing DIMMs.

How can I confirm the kit is running at CL38 7200 MHz after enabling the XMP profile?

Check the memory tab in CPU-Z or the BIOS main screen; both will show 7200 MT/s and CAS latency 38 when the profile is active.

Veel samast osakonnast

Kliendid võrdlesid neid ka

Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.