Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.

Hinnavaatlus Logi sisse
Two green DDR2 desktop memory modules with gold contacts and black chips

Kingston Technology Corp.

Kingston Technology Corp. KVR667D2K2/2GR 2GB (2 x 1GB) DDR2 667 desktop RAM

SKU CH-WQPS-3SFMK MPN KVR667D2K2/2GR

A 2 GB dual-channel DDR2 667 kit with CL5 latency and 1.80 V operation

  • Capacity2GB (2 x 1GB)
  • SpeedDDR2 667 (PC2 5300)
  • CAS LatencyCL5
  • Voltage1.80V
  • ECCNo
  • Multi-channel KitDual Channel Kit
  • Dual-channel kit doubles bandwidth for smoother multitasking
  • 3 GB/s peak throughput keeps older systems responsive
  • CL5 latency at 667 MHz balances speed and stability
  • 80 V operation reduces heat without extra cooling
  • Kingston ValueRAM validation ensures broad motherboard compatibility

Kingston ValueRAM DDR2 Kit

This Kingston ValueRAM kit supplies two 1 GB DDR2 modules for a total of 2 GB. It runs at DDR2 667 (PC2 5300) with CL5 latency and 1.80 V. The dual-channel pair targets older desktop systems that still use DDR2 memory slots. Builders restoring or upgrading legacy hardware can use this kit to match original specifications.

Check motherboard DDR2 support

Verify that the motherboard accepts DDR2 DIMMs and can run at 667 MT/s with CL5 timing at 1.80 V. Confirm the board has at least two free slots for the dual-channel kit. Older chipsets may limit usable capacity per slot, so consult the board manual for maximum supported density before ordering. ECC is not present, so the platform must support non-ECC memory.

Standard DIMM form factor

The modules use the standard 240-pin DDR2 DIMM layout without heat spreaders. This low-profile design fits tight spaces beside large CPU coolers or in compact cases. Gold edge connectors resist oxidation for reliable long-term contact. The kit delivers up to 5.3 GB/s bandwidth per module, matching the PC2 5300 rating for period-correct performance.

Põhijooned

  • Dual-channel kit doubles bandwidth for smoother multitasking
  • 3 GB/s peak throughput keeps older systems responsive
  • CL5 latency at 667 MHz balances speed and stability
  • 80 V operation reduces heat without extra cooling
  • Kingston ValueRAM validation ensures broad motherboard compatibility

Tehnilised andmed

BrandKingston
SeriesValueRAM
ModelKVR667D2K2/2GR
Capacity2GB (2 x 1GB)
SpeedDDR2 667 (PC2 5300)
CAS LatencyCL5
Voltage1.80V
ECCNo
Multi-channel KitDual Channel Kit
Heat SpreaderNo
Tarnekaal0.05 kg
Pakendi mõõtmed171 × 95 × 13 mm

Küsimused selle toote kohta

Will this kit fit a motherboard with DDR2 slots?

Yes, the modules are DDR2 667 (PC2 5300) desktop DIMMs and require a motherboard that accepts DDR2 memory.

Can I run these sticks at 1.80 V without changing BIOS settings?

The kit is rated for 1.80 V, which is the standard DDR2 voltage, so most boards will apply it automatically.

Does the dual-channel kit need matched slots to work?

Install one module in each channel — usually colour-coded slots — to enable dual-channel operation.

Veel samast osakonnast

Kliendid võrdlesid neid ka

Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.