Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.

Hinnavaatlus Logi sisse
Lay-flat 3.5 inch SATA dock and aluminium M.2 NVMe adapter side by side

LORDWORLD

LORDWORLD 3.5" USB 3.0 SATA Dock + M.2 USB 3.2 NVMe/SATA Adapter

SKU CH-H6MC-ZGQQ6

Docks 3.5" and 2.5" SATA drives up to 20TB via USB 3.0 and adds a tool-free M.2 adapter for SATA and NVMe SSDs at 10Gbps

  • Tool-free 3.5" SATA dock accepts drives up to 20TB
  • USB 3.0 host link with UASP and TRIM for faster SATA transfers
  • Aluminium M.2 adapter runs NVMe at 10Gbps via USB 3.2 Gen 2
  • Same M.2 adapter handles SATA M.2 at 6Gbps over USB 3.2 Gen 2
  • Supports M.2 lengths 2242, 2260 and 2280 in M-Key or B+M Key

Dual-Drive Adapter Bundle

This bundle pairs a 3.5-inch SATA dock with an M.2 adapter, letting you connect both 2.5 and 3.5-inch SATA drives plus M-key or B+M-key M.2 SSDs. It suits technicians and hobbyists who need quick, tool-free access to multiple drive types from one USB connection. No internal installation is required.

Interface Speed Limits

The SATA dock runs over USB 3.0, so SATA drive throughput is capped by that 5 Gbps link rather than the drive’s own speed. The M.2 adapter uses USB 3.2 Gen 2 at 10 Gbps for NVMe PCIe SSDs and 6 Gbps for SATA M.2 SSDs, with UASP and TRIM supported on both adapters. Actual transfer rates will not exceed these bus ceilings.

Compatibility Checklist

Verify your host port can deliver enough power for a 3.5-inch mechanical drive; some laptop ports may need a powered hub. Confirm your M.2 SSD is 2242, 2260 or 2280 length and uses either M-key or B+M-key pinout. The SATA dock accepts drives up to 20 TB capacity.

Põhijooned

  • Tool-free 3.5" SATA dock accepts drives up to 20TB
  • USB 3.0 host link with UASP and TRIM for faster SATA transfers
  • Aluminium M.2 adapter runs NVMe at 10Gbps via USB 3.2 Gen 2
  • Same M.2 adapter handles SATA M.2 at 6Gbps over USB 3.2 Gen 2
  • Supports M.2 lengths 2242, 2260 and 2280 in M-Key or B+M Key

Tehnilised andmed

BrandLORDWORLD

Küsimused selle toote kohta

Should I use the 3.5" dock or the M.2 adapter for my 2.5" SATA SSD?

Use the 3.5" dock — it accepts both 3.5" and 2.5" SATA drives up to 20TB, while the M.2 adapter only fits M.2 form-factor SSDs.

What real-world throughput will I see from the 3.5" dock's USB 3.0 link with a SATA SSD?

The USB 3.0 connection caps at 5 Gbps, so a SATA SSD will top out near that limit instead of its native 6 Gbps.

Which M.2 key types and lengths does the aluminum adapter support?

It takes M-Key and B+M Key modules in 2242, 2260 and 2280 sizes, covering both NVMe and SATA M.2 SSDs.

Veel samast osakonnast

Kliendid võrdlesid neid ka

Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.