Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.

Hinnavaatlus Logi sisse
LORDWORLD CM4 development kit with 7 inch IPS touch display and IO board

LORDWORLD

LORDWORLD CM4 Development Kit Acce B with 7" 1024×600 Touch Display

SKU CH-BVX4-MASPG

A Compute Module 4 carrier kit with official IO board, 7" 1024×600 IPS touch display and basic accessories for embedded prototyping

  • Complete CM4 kit with IO board, touch display and accessories
  • 7 inch IPS capacitive touch screen at 1024×600 resolution
  • Official carrier board adds dual HDMI, Gigabit Ethernet, dual USB 2.0 and microSD
  • Ready for embedded prototypes — add a CM4 module and HAT or PCIe cards
  • Includes 12V power supply, USB cable and DSI/CSI adapters

All-in-One CM4 Prototyping Kit

This kit combines the official CM4 IO Board with a 7" IPS capacitive touch display and basic accessories. It provides a ready-to-use platform for evaluating and prototyping with the Raspberry Pi Compute Module 4. Developers can start building embedded applications immediately after inserting their Compute Module 4.

For Embedded HMI Developers

Engineers building digital signage, industrial gateways, automation controllers or kiosks benefit from the integrated touchscreen and rich I/O. Buyers who only need a carrier board without a display should look at a standalone IO Board. Projects requiring a different screen size or interface will need separate components.

Official CM4 IO Board Included

The carrier board supplies a CM4 socket, dual HDMI outputs, dual MIPI DSI and CSI-2 ports, Gigabit Ethernet RJ45, 2× USB 2.0, micro USB, microSD socket, fan header and RTC. It also supports off-the-shelf HATs and PCIe cards such as NVMe or SATA adapters for rapid system expansion.

Põhijooned

  • Complete CM4 kit with IO board, touch display and accessories
  • 7 inch IPS capacitive touch screen at 1024×600 resolution
  • Official carrier board adds dual HDMI, Gigabit Ethernet, dual USB 2.0 and microSD
  • Ready for embedded prototypes — add a CM4 module and HAT or PCIe cards
  • Includes 12V power supply, USB cable and DSI/CSI adapters

Tehnilised andmed

BrandLORDWORLD

Küsimused selle toote kohta

How do I attach the 7" 1024×600 IPS touch display to the official CM4 IO Board, and which step is often missed?

Connect the display using the supplied DSI adapter to one of the dual MIPI DSI ports on the IO Board and plug in the USB cable for touch; the step often missed is inserting the Compute Module 4 into the socket before powering on.

What maintenance will the kit need later, such as the fan header or RTC battery?

The fan header lets you add active cooling if the Compute Module 4 runs hot under load, and the RTC on the IO Board keeps time when the 12V/2A power adapter is disconnected.

What limit appears first when the Compute Module 4 runs sustained workloads on this kit?

The 12V/2A power adapter caps total current at 2.0 A, so heavy PCIe NVMe or SATA cards plus the display can hit the power budget before thermal throttling becomes an issue.

Veel samast osakonnast

Kliendid võrdlesid neid ka

Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.