Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.

Hinnavaatlus Logi sisse
Small green circuit board with a 1.47 inch colour screen and pin headers

LORDWORLD

LORDWORLD ESP32-S3 1.47inch LCD Development Board Type B 172×320 262K Colour

SKU CH-Q96P-B1ARN

ESP32-S3 development board with 1.47inch IPS LCD, 172×320 resolution, 262K colour, TF card slot, 6-axis IMU, 2.4GHz Wi-Fi and Bluetooth 5

  • Dual-core 240 MHz processor enables fast AIoT computing
  • 47 inch IPS panel shows 172×320 resolution in 262K colour
  • 4 GHz Wi-Fi 802.11 b/g/n with 40 MHz bandwidth connects projects wirelessly
  • Bluetooth 5 LE and Mesh support low-power device links
  • Onboard TF card slot plus 6-axis IMU add storage and motion sensing

ESP32-S3 1.47 inch IPS LCD Board

The LORDWORLD ESP32-S3 board is a compact IoT edge device built around a 32-bit LX7 dual-core processor running at up to 240 MHz. It integrates a 1.47 inch IPS panel with a 172 by 320 resolution and 262K colour depth. Onboard peripherals include a TF card slot and a 6-axis IMU, while a GPIO header allows further expansion. The module supports 2.4 GHz Wi-Fi 802.11 b/g/n with 40 MHz bandwidth and Bluetooth 5 LE and Mesh connectivity.

Makers building AIoT prototypes with onboard display

Developers who need a ready-to-run GUI platform for LVGL or similar lightweight frameworks will benefit from the integrated screen, motion sensor and wireless stack in a single module. The board suits projects that require sensor fusion, local storage and 2.4 GHz wireless in a small footprint. Builders who need a larger display area, higher resolution, or connectivity beyond 2.4 GHz Wi-Fi and Bluetooth 5 should look at alternative hardware.

1.47 inch 172×320 IPS display with 262K colours

The onboard screen size and pixel count define how much graphical information can be shown at once and whether a given LVGL interface will fit comfortably. This resolution and colour depth are the primary constraints for any GUI design targeting this board.

Põhijooned

  • Dual-core 240 MHz processor enables fast AIoT computing
  • 47 inch IPS panel shows 172×320 resolution in 262K colour
  • 4 GHz Wi-Fi 802.11 b/g/n with 40 MHz bandwidth connects projects wirelessly
  • Bluetooth 5 LE and Mesh support low-power device links
  • Onboard TF card slot plus 6-axis IMU add storage and motion sensing

Tehnilised andmed

BrandLORDWORLD

Küsimused selle toote kohta

What are the physical dimensions of the 1.47 inch IPS display panel on this board?

The onboard display measures 172 by 320 pixels with 262K colour depth and uses an IPS panel for wide viewing angles.

Which step is often missed when setting up the ESP32-S3 development environment for this board?

Install the ESP32-S3 board package in Arduino IDE, select the correct USB port, and hold the BOOT button while pressing RESET to enter download mode before uploading code.

What storage expansion does the TF card slot provide for long-term data logging?

The onboard TF card slot accepts microSD cards for non-volatile storage of sensor data, GUI assets or firmware updates without relying on internal flash.

Veel samast osakonnast

Kliendid võrdlesid neid ka

Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.