SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
391,99 $
0.00500875BTC
Laos
LORDWORLD
LORDWORLD IMX219-83 Dual 8MP Binocular Stereo Camera Module
Dual 8MP IMX219 binocular camera module for stereo vision, depth perception and AI development on Raspberry Pi and Jetson boards
- Dual 8 MP sensors enable stereo depth perception
- Binocular design supports 3D vision for robotics and AI
- Works with Raspberry Pi 5 and CM boards
- Compatible with Jetson Nano, Xavier NX, Orin NX, Orin Nano and RDK
- Compact module fits embedded edge-computing projects
Dual 8MP Stereo Vision Module
The LORDWORLD IMX219-83 stereo camera module integrates two 8MP IMX219 sensors into a single binocular unit. It is built for developers working on stereo vision, depth estimation and AI vision projects on embedded platforms.
Target Users and Limits
This module suits robotics engineers, computer-vision researchers and makers building 3D perception or visual recognition systems on Raspberry Pi 5, Compute Module base boards or Jetson Nano, Xavier NX, Orin NX, Orin Nano and RDK series boards. It is not for users who need higher resolution sensors, global shutter capture or thermal imaging capabilities.
Capacity and Headroom
Dual 8MP sensors provide sufficient pixel density for stereo matching, depth map generation and visual data collection in compact edge-computing setups. The fixed sensor resolution and baseline constrain maximum disparity range and low-light performance, so very fine depth detail at long distances or high-speed motion capture will require different hardware.
Põhijooned
- Dual 8 MP sensors enable stereo depth perception
- Binocular design supports 3D vision for robotics and AI
- Works with Raspberry Pi 5 and CM boards
- Compatible with Jetson Nano, Xavier NX, Orin NX, Orin Nano and RDK
- Compact module fits embedded edge-computing projects
Tehnilised andmed
| Brand | LORDWORLD |
|---|
Küsimused selle toote kohta
Which Raspberry Pi or Jetson board must I already own to connect this IMX219-83 stereo camera?
The module works with Raspberry Pi 5, CM3, CM3+, CM4 base boards, Jetson Nano, Xavier NX, Orin NX, Orin Nano and RDK series boards.
Will the dual IMX219 sensors operate correctly alongside an older single-camera module I keep installed?
Each 8MP IMX219 sensor runs independently, so the stereo pair can capture synchronised frames while a legacy camera remains on a separate CSI port.
How can I verify the binocular module is producing valid depth frames after setup?
Run a stereo-matching demo on the host board; aligned left and right 8MP images with measurable disparity confirm the IMX219-83 pair is calibrated and streaming correctly.
Veel samast osakonnast
Kliendid võrdlesid neid ka
Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.
