Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.

Hinnavaatlus Logi sisse
Small green circuit board with USB connector and XBee socket, CP2102 chip visible

LORDWORLD

LORDWORLD XBee USB Adapter UART Development Board CP2102

SKU CH-2RJ7-WCTM6

A USB adapter with CP2102 UART interface for testing and programming XBee modules using onboard buttons and LEDs

  • Onboard buttons and LEDs simplify XBee module testing
  • CP2102 chip provides USB-to-UART conversion and power output
  • USB interface enables direct connection to a computer
  • Easy programming and configuration of XBee modules
  • Compact development board for IoT edge applications

XBee USB Adapter for Module Testing

The LORDWORLD XBee USB Adapter provides a CP2102 UART bridge so developers can connect XBee modules to a computer over USB. Onboard buttons and LEDs let you exercise module functions without extra hardware. It suits engineers and hobbyists who need a quick way to verify radio behaviour during firmware work.

Installing the CP2102 Bridge

Plug the board into a USB port and install the CP2102 driver if the operating system does not load it automatically. The adapter then appears as a virtual COM port for terminal or configuration software. A common issue is forgetting to match the baud rate in the terminal to the XBee module setting, which causes garbled output.

Sustained Data Throughput

The CP2102 UART interface handles continuous serial streams at standard rates without overheating during long test sessions. Power is drawn from the USB bus, so the host port must supply enough current for the attached XBee module. Extended logging or firmware uploads run reliably as long as the USB connection remains stable.

Põhijooned

  • Onboard buttons and LEDs simplify XBee module testing
  • CP2102 chip provides USB-to-UART conversion and power output
  • USB interface enables direct connection to a computer
  • Easy programming and configuration of XBee modules
  • Compact development board for IoT edge applications

Tehnilised andmed

BrandLORDWORLD

Küsimused selle toote kohta

How can I verify the CP2102 adapter is working after connecting an XBee module?

The onboard buttons and LEDs let you test XBee modules directly; successful communication and LED activity confirm the adapter is functioning as intended.

What comes in the box and what must I supply myself?

The board includes the CP2102 USB-to-UART circuitry, XBee interface, and onboard buttons/LEDs; you must provide the XBee module and a USB cable separately.

Which version of this adapter should I choose for programming XBee modules?

This single model features the CP2102 chip, an XBee socket, and test buttons/LEDs, making it suitable for programming and configuring XBee modules.

Veel samast osakonnast

Kliendid võrdlesid neid ka

Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.