Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.

Hinnavaatlus Logi sisse
Bare 3.5 inch SCSI hard drive with 80-pin connector

Maxtor

Maxtor Atlas 10K V 8J073J0 74GB 10000 RPM 8MB SCSI Ultra320 80pin 3.5" internal hard drive

SKU CH-4RN1-4DCSA MPN 8J073J0

74 GB, 10,000 RPM SCSI Ultra320 drive with 8 MB cache for high-throughput desktop workloads

  • PackagingBare Drive
  • InterfaceSCSI Ultra320 80pin
  • Capacity74GB
  • RPM10000 RPM
  • Cache8MB
  • Average Seek Time4ms
  • 10,000 RPM spindle speed cuts data-access latency
  • 8 MB cache buffers bursts for smoother throughput
  • SCSI Ultra320 80-pin interface delivers 320 MB/s bandwidth
  • 4 million hours MTTF rating supports 24×7 operation
  • 5-inch form factor fits standard drive bays

Server-class 74GB SCSI drive

The Maxtor Atlas 10K V 8J073J0 is a 74GB 3.5-inch internal hard drive spinning at 10000 RPM with an 8MB cache. It uses the SCSI Ultra320 80-pin interface and is rated for 1.4 million hours MTTF. Designed for 24x7 operation in enterprise environments.

Bare drive with 80-pin connector

Supplied as a bare drive without cables or brackets, the unit relies on an 80-pin SCA connector that carries both power and data. A compatible backplane or hot-swap cage is required for installation. The drive includes a thermal sensor, Shock Protection System and S.M.A.R.T. monitoring. RoHS compliant.

Check host compatibility first

Some motherboards do not support the SCSI interface; verify that your system has a suitable Ultra320 controller or HBA before ordering. The 80-pin form factor will not fit standard 68-pin internal cables without an adapter. Ensure your chassis accepts 3.5-inch drives and provides adequate cooling for 10000 RPM operation.

Põhijooned

  • 10,000 RPM spindle speed cuts data-access latency
  • 8 MB cache buffers bursts for smoother throughput
  • SCSI Ultra320 80-pin interface delivers 320 MB/s bandwidth
  • 4 million hours MTTF rating supports 24×7 operation
  • 5-inch form factor fits standard drive bays

Tehnilised andmed

BrandMaxtor
SeriesAtlas 10K V
Model8J073J0
PackagingBare Drive
InterfaceSCSI Ultra320 80pin
Capacity74GB
RPM10000 RPM
Cache8MB
Average Seek Time4ms
Average Write Time4.5ms
Average Latency3ms
FeaturesSome motherboards are not compatible with the SCSI interface. Please confirm which interface is appropriate for your system!
Designed for 1.4 million hours MTTF
24x7 dependability
Proven Atlas family architecture and firmware
Shock Protection System
Thermal sensor
S.M.A.R.T. features
RoHS Compliant
Form Factor3.5"
Tarnekaal0.68 kg
Pakendi mõõtmed203 × 152 × 51 mm

Küsimused selle toote kohta

What maximum throughput does the SCSI Ultra320 80pin interface provide on this 74GB drive?

The SCSI Ultra320 80pin interface supports up to 320 MB/s burst transfer, though sustained rates depend on the 10000 RPM mechanics and 8MB cache.

Will the 3.5 inch 80-pin SCA connector fit directly into my server backplane or does it need an adapter?

The 3.5 inch form factor uses an 80-pin SCA connector that plugs straight into a compatible hot-swap backplane; no separate power or signal cables are required.

How do I set the SCSI ID on this bare drive before installing it in a RAID array?

The drive has no jumpers; the SCSI ID is assigned by the backplane slot position, so insert it into the bay that matches the desired ID.

Veel samast osakonnast

Kliendid võrdlesid neid ka

Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.