BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00277883BTC
Laos
Micron Technology, Inc.
Micron Technology, Inc. MT36KDZS2G72PZ-1G6 16GB DDR3 1600MHz ECC-Registered VLP desktop RAM
16 GB DDR3 ECC-registered VLP DIMM running at 1600 MHz with 1.35 V low-voltage operation
- Capacity16GB
- SpeedDDR3 1600 (PC3 12800)
- 16 GB capacity supports memory-intensive workloads
- ECC-registered design detects and corrects data errors
- 1600 MHz DDR3 speed delivers responsive throughput
- 35 V low-voltage operation reduces power draw
- 240-pin VLP DIMM fits space-constrained chassis
16 GB DDR3 ECC-Registered VLP Module
This single 16 GB DDR3 module runs at 1600 MHz with a low 1.35 V operating voltage. It uses a 240-pin DIMM form factor in a very low profile height. The registered ECC design targets servers and workstations that require error correction and signal buffering.
Thermals, Noise and Power Draw
Operating at 1.35 V reduces power consumption compared to standard 1.5 V DDR3 modules. Lower voltage also decreases heat output, helping system fans run quieter under load. The VLP height improves airflow in dense 1U or blade chassis where clearance is tight. No active cooling is required on the module itself.
What the Registered ECC Design Changes
Registered buffering reduces electrical load on the memory controller, allowing larger memory populations per channel. ECC circuitry detects and corrects single-bit errors, protecting data integrity in critical workloads. The 2Rx4 rank organisation supports high-density server configurations. This module is not suited for consumer desktops that lack registered ECC support in the chipset or BIOS.
Põhijooned
- 16 GB capacity supports memory-intensive workloads
- ECC-registered design detects and corrects data errors
- 1600 MHz DDR3 speed delivers responsive throughput
- 35 V low-voltage operation reduces power draw
- 240-pin VLP DIMM fits space-constrained chassis
Tehnilised andmed
| Capacity | 16GB |
|---|---|
| Speed | DDR3 1600 (PC3 12800) |
Küsimused selle toote kohta
How do I install the 240-pin DDR3 VLP DIMM, and what step is often missed?
Align the notch with the slot key, press straight down until both retention clips click, and verify the 1.35 V low-voltage setting is enabled in BIOS so the module runs at its rated PC3-12800 speed.
What maintenance or replacement will this 16 GB 2Rx4 registered module need later?
No routine maintenance is required; if a memory test eventually reports correctable ECC errors rising above threshold, replace the module with another DDR3 1600 MHz 1.35 V registered DIMM of matching rank and capacity.
What limit appears first when this registered ECC memory runs sustained workloads?
The DDR3 1600 MHz clock and 1.35 V voltage ceiling cap sustained throughput at PC3-12800; thermal throttling may engage before bandwidth saturates if chassis airflow is restricted.
Veel samast osakonnast
Kliendid võrdlesid neid ka
Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.
